摘要
聚焦于采用热机械控制工艺(TMCP)钢板生产的焊管在酸性工况下的抗SSC性能,从内在因素和外部因素对TMCP焊管抗SSC性能影响因素进行分析研究.阐述了焊管制造过程对硬度的影响,以及不同显微组织、硬度分布等内在因素对焊管抗SSC性能的影响,介绍了局部硬区的成型机理及控制措施;对H2S分压、温度和应力变化等外部因素对焊管抗SSC性能的影响规律进行了分析总结,并根据SSC试验数据对TMCP的合理应用提出建议.结果表明,显微组织和硬度分布是TMCP焊管并抗SSC的关键因素,局部硬区对高强度TMCP焊管抗SSC性能影响较大,建议在钢板制造过程中加强硬度控制,避免钢管出现局部硬区;随着强度和硬度的增加,H2S分压越高,加载应力越大,SSC风险增加.虽然符合现行标准要求的X52MS和X65MS可通过标准试验,但在超过标准要求试验条件的高H2S分压工况下,硬度和强度更低的X52MS具有更优异的抗SSC性能;X65MS焊管高H2S分压工况存在SSC风险,建议针对具体工况开展特定的SSC评价,以确保其适用性.
For the sulfide stress cracking(SSC)resistance of welded pipes fabricated from thermomechanical controlled process(TMCP)steel plates under sour service condition,intrinsic and external factors affecting the SSC resistance of TMCP welded pipes are analyzed and investigated.The influence of pipe manufacturing processes on hardness,as well as the effects of intrinsic factors including diverse microstructures and hardness distribution on the SSC resistance of welded pipes,are elaborated.The formation mechanism and control measures for local hard zones are presented.The influences of external factors such as H₂S partial pressure,temperature and stress variation on the SSC resistance of welded pipes are analyzed and summarized.Recommendations for the rational application of TMCP-produced steels are put forward based on SSC test data.The results show that microstructure and hardness distribution constitute the key determinants of SSC resistance for TMCP welded pipes.Local hard zones exert a considerable adverse effect on the SSC resistance of high-strength TMCP welded pipes.It is suggested that hardness control shall be strengthened during steel plate production to prevent local hard zones in finished pipes.SSC risk rises with increasing steel strength and hardness,higher H₂S partial pressure and larger applied stress.X52MS and X65MS grades complying with prevailing standards can pass standard qualification tests.Nevertheless,under high-H2S partial-pressure service conditions beyond standard test requirements,X52MS with lower strength and hardness exhibits superior SSC resistance.X65MS welded pipes are subject to SSC risks.Therefore,targeted SSC evaluation shall be performed for specific service conditions to verify its applicability.