军事知识服务平台
风电塔筒门框焊接变形数值模拟及工艺优化
Numerical Simulation and Process Optimization of Welding Distortion for Wind Turbine Tower Door Frames
摘要 针对风电塔筒门框焊接变形控制难的问题,以焊接电压、焊接电流与焊接速度为研究对象,建立了工艺参数与焊接变形之间的映射关系.基于热-力耦合有限元仿真,设计11组CCD虚拟试验,并采用响应曲面法构建焊接变形多参数预测模型,共完成15组数值仿真.通过方差分析与响应曲面图,系统量化了电压-电流、电压-速度、电流-速度之间的二阶交互作用对变形的影响规律,揭示了多参数协同作用的内在机理,识别出使焊接变形最小化的最优工艺参数区间,推荐焊接工艺参数为焊接电压36~38 V、焊接电流260~290 A、焊接速度350~400 mm/min.建立的基于直接可调参数的工艺窗口,可为风电塔筒焊接工艺精细化调控提供可靠的参数依据,具备良好工程应用价值.
Abstract:
To address the challenging issue of controlling welding distortion in wind turbine tower door frames,welding voltage,current,and speed were taken as key parameters and the mapping relationship between process parameters and welding distortion was established.Based on thermal-mechanical coupled finite element simulation,11 CCD virtual experiments were designed,and a multi-parameter prediction model for welding distortion was developed using response surface methodology,involving a total of 15 numerical simulations.Through variance analysis and response surface plots,the second-order interaction effects between voltage-current,voltage-speed,and current-speed were systematically quantified,revealing the intrinsic mechanisms of multi-parameter synergy.The optimal parameter range for minimizing welding distortion was identified,recommending the following welding parameters:voltage 36~38 V,current 260~290 A,and speed 350~400 mm/min.The established process window based on directly adjustable parameters provides a reliable basis for refined control of wind turbine tower welding processes,demonstrating strong practical engineering value.
刊 名 焊管
年,卷(期): 2026, 49(9)
分类号: TG404
机标分类号: TG456.7 TS201.1 TG146.2
在线出版日期: 2026年10月14日