军事知识服务平台
4.5Cr-0.5Cu L360M耐蚀高频焊管开发
Development of 4.5Cr-0.5Cu L360M Corrosion Resistant HFW Pipe
摘要 针对含CO₂及硫酸盐还原菌(SRB)的腐蚀环境,在低碳管线钢中添加适量Cr和Cu,开发出兼具抗CO₂腐蚀与抗SRB腐蚀性能的耐蚀热轧板卷.制管时通过添加气体保护装置,实现无氧环境下的HFW焊接,可减少氧化、气孔等缺陷,形成完整无缺陷焊接接头,开发出含4.5Cr-0.5Cu的L360M钢级Φ168.3 mm×6.3 mm耐蚀高频焊管.结果表明,-10℃下焊缝冲击功≥138 J、维氏硬度≤242HV10,焊管压扁试验压至管壁贴合时,焊缝未出现裂纹,完全满足API SPEC 5L标准要求,具有优异的强塑性;在苛刻CO2及细菌腐蚀环境下,试制的焊管母材最大均匀腐蚀速率0.13 mm/a,最大点蚀速率0.26 mm/a,腐蚀速率降低至常规L360焊管母材的1/10;HIC和SSC试验结果显示,在90%SMYS高应力加载条件下,开发的HFW焊管表面未出现鼓泡、截面裂纹及断裂失效,满足API SPEC 5L标准要求,表明该管材在高含H₂S工况下具有良好的抗硫化氢应力腐蚀及抗氢致开裂能力.开发的含4.5Cr-0.5Cu L360M 高频焊管,具有良好的抗CO2+细菌腐蚀性能和一定的抗H2S腐蚀性能,在输送含CO₂、H₂S及硫酸盐还原菌(SRB)等高腐蚀油气介质工况下,可显著延长管材整体服役寿命.
Abstract:
For corrosive environment containing CO2 and sulfate reducing bacteria(SRB),appropriate amounts of Cr and Cu were added to low-carbon pipeline steel to develop corrosion-resistant hot-rolled coils that balance resistance to CO2 corrosion and SRB corrosion.By adding a gas protection device during pipe production,HFW in an oxygen-free environment was achieved,which can avoid defects such as oxidation and porosity,and form a complete and defect-free welded joint.L360M steel grade,with a specification of 168.3 mm×6.3 mm,corrosion-resistant high-frequency resistance welded pipe containing 4.5Cr-0.5Cu was developed.Results showed that the impact energy of the weld at-10℃in the mechanical test was≥138 J,the Vickers hardness was≤242HV10,and the weld did not crack when flattened until the opposite pipe walls contact during the flattening test.It fully meets the requirements of API SPEC 5L standard and has excellent strength and plasticity.Experiments conducted in harsh CO2 and bacterial corrosion environments have shown that the maximum uniform corrosion rate of the trial welded pipe base material is 0.13 mm/a,the maximum pitting corrosion rate is 0.26 mm/a,and the corrosion rate is reduced to 1/10 of the conventional L360 welded pipe base material.HIC and SSC test results show that under high stress loading conditions of 90%SMYS,the developed HFW pipe surface did not exhibit bubbling,cross-sectional cracks,or fracture failure,meeting the requirements of API SPEC 5L standard.This indicates that the pipe has good resistance to stress corrosion and hydrogen induced cracking under high H2S conditions.It can be seen that the developed HFW pipe containing 4.5Cr-0.5Cu has good resistance to CO2+bacterial corrosion and certain resistance to H2S corrosion.Under the working conditions of transporting highly corrosive oil and gas media containing CO2,H2S,and sulfate reducing bacteria(SRB),the overall service life of the pipe can be significantly extended.
刊 名 焊管
年,卷(期): 2026, 49(9)
分类号: TG335.75
机标分类号: TG142.71 TG407 X703.1
在线出版日期: 2026年10月14日
基金项目: 2023ZZ21:中石油股份公司科技专项页岩气规模增储上产与勘探开发技术研究项目,