军事知识服务平台
卵圆式扫描激光雷达安置角误差校正方法
Calibration Method for Installation Error of Oval-Scanning LiDAR
摘要 机载激光测深技术是近年来发展起来的十分高效的海洋沿岸测深技术,但在系统安置过程中,安置角误差会对测量结果造成影响.因此,为提高系统测量精度,必须对安置角误差进行检校.本文针对圆镜偏轴式激光雷达的卵圆式扫描特点,提出了基于前后向定点扫描轨迹进行安置角误差校正的方法.首先建立卵圆式激光扫描模型,然后阐述误差检校方法的基本原理,最后通过试验验证了该方法的有效性和可行性.该方法针对卵圆式扫描激光雷达的特点,对安置角造成的固定误差进行有效检校,对后续研究和提高系统测量精度有着至关重要的作用.
Abstract:
Airborne laser bathymetry is a highly efficient technology for coastal depth measurement that has developed rapidly in recent years.However,installation angle errors during system setup inevitably affect the measurement results.Therefore,to improve the accuracy of the system,it is essential to calibrate these installation errors.This paper proposes a calibration method for installation errors based on forward and backward fixed-point scanning trajectories,tailored to the oval-scanning characteristics of off-axis circular mirror LiDAR.First,an oval laser scanning model is established.Then,the fundamental principles of the error calibration method are explained and introduced.Finally,the feasibility and effectiveness of the method are verified through experiments.Targeting the features of oval-scanning LiDAR,this method effectively calibrates systematic errors caused by installation angles and contributes significantly to subsequent research and the improvement of measurement accuracy in the system.
刊 名 海洋技术学报 ISTIC
年,卷(期): 2026, 45(4)
分类号: P237
机标分类号: P229 TN958.98 TP391.41
在线出版日期: 2026年9月8日
基金项目: 2025mmit05:自然资源部海洋计量检测技术创新中心创新基金资助项目,