海底沉积物重力活塞取样器贯入深度及取样率研究
Study on Penetration Depth and Sampling Rate of Gravity Piston Cores for Seafloor Sediments
摘要
针对海底重力活塞取样器贯入深度与取样率缺乏系统性理论计算问题,基于能量守恒原理与太沙基承载力理论,本文构建了海底沉积物柱状取样贯入深度与取样率理论计算模型,利用控制变量法系统分析了取样器质量、沉积物极限摩擦系数、取样管直径及取样器下沉速度等因素对贯入深度的影响,并探讨了取样管内径、壁厚及沉积物力学性质对取样率的影响机制.研究表明:在相同水深的情况下,贯入深度随取样器质量增大而增加,随沉积物极限摩擦系数增大而减小,小口径取样器在低沉积物极限摩擦系数的软质海底中贯入性能更优.取样率随取样管内径增大而显著提高,壁厚对其影响甚微.通过科考船实测数据验证,理论模型计算结果与现场数据基本吻合,证实了模型的有效性与工程适用性.相关结果可为实际作业中重力活塞取样器的选择提供理论依据,并对海底沉积物长柱状取样器的结构设计和技术研发具有参考意义.
In response to the lack of systematic theoretical calculation methods for the penetration depth and sampling rate of seafloor grav-ity piston corers,this study establishes a theoretical model for calculating the penetration depth and sampling rate of seafloor sediment cor-ing based on the principle of energy conservation and Terzaghi's bearing capacity theory.Using the control variable method,the influence of factors such as corer mass,sediment friction coefficient,coring tube diameter,and sinking velocity on penetration depth is systematically analyzed.Furthermore,the mechanisms by which the inner diameter and wall thickness of the coring tube,as well as the mechanical prop-erties of sediments,affect the sampling rate are investigated.The findings indicate that penetration depth increases with greater corer mass but decreases with a higher sediment friction coefficient.Small-diameter corers demonstrate superior penetration performance in soft seabed with low friction coefficients.The sampling rate significantly improves with an increase in the inner diameter of the coring tube,while wall thickness has a negligible effect.Validation using field data collected by a research vessel shows good agreement between the theoretical model's predictions and the measured data,confirming the model's validity and engineering applicability.These results pro-vide a theoretical basis for selecting gravity piston corers in practical operations and offer insights for the structural design and technologi-cal development of long seafloor sediment corers.
年,卷(期):
2026, 45(4)
分类号:
P716.1
机标分类号:
U4
TU457
TP391.9
在线出版日期:
2026年9月8日
基金项目:
LSKJ202204900:崂山实验室科技创新项目,