军事知识服务平台
PDC复合冲击钻下的岩石破碎过程应力变化规律研究
Study on Stress Variation Law of Rock Fragmentation Process under PDC Composite Impact Drilling
摘要 为了细化分析关键变量对应力变化的独立影响,研究了PDC复合冲击钻下的岩石破碎过程应力变化规律.选取某区域2 500~3 000 m岩石作为研究对象,按照破碎应力变化规律选取EDEM设置试验岩石材料与钢板材料接触参数,利用CAD进行三维仿真建模,结合岩石颗粒的粘结关系确定法向约束状态,构建岩石颗粒接触模型,分析临界切向应力、临界法向应力、切向接触刚度、法向接触高度,使用单轴压缩法校验与设置加载速度与平均加载时间,调整冲击钻接触位置进行应力归零处理,记录试件被加载时的试验力关系,判断出应力变化与切削时间、破碎方式、切削深度、切削齿直径和切削角度有关.研究结果表明,切削参数切削前倾角为5°、切削直径为8 mm、切削速度为2 m/s、切削深度为2.5 mm时,切削应力较低,掘进效率较高.
Abstract:
To refine the independent influence of key variables on stress variation,the stress variation patterns during rock fragmentation under PDC composite impact drilling were investigated.A 2 500-300 m rock section from a specific area was selected as the research subject.Based on the stress variation patterns,EDEM was configured with contact parameters for experimental rock and steel plate materials.A 3D simulation model was created using CAD,and the normal constraint state was determined by analyzing the bonding relationships of rock particles.A rock particle contact model was constructed to analyze critical tangential stress,critical normal stress,tangential contact stiffness,and normal contact height.The uniaxial compression method was used to validate and set the loading speed and average loading time.The impact drilling contact position was adjusted for stress zeroing,and the experimental force relationship during loading was recorded.It was concluded that stress variation is related to cutting time,fragmentation mode,cutting depth,cutting tooth diameter,and cutting angle.The results indicate that when the cutting parameter includes a 5° cutting inclination angle,an 8mm cutting diameter,a 2 m/s cutting speed,and a 2.5 mm cutting depth,the cutting stress is lower,and the excavation efficiency is higher.
刊 名 结构工程师 ISTIC
年,卷(期): 2026, 42(4)
分类号: TD235.1
机标分类号: TH113.1 TG506 TP391.9
在线出版日期: 2026年9月21日