军事知识服务平台
考虑局部接触状态的斜齿轮时变啮合刚度及特性研究
Study on Time-varying Mesh Stiffness and Characteristics of Helical Gears based on the Improved Energy Method
摘要 时变啮合刚度是齿轮传动系统振动与噪声的重要内部激励.为提高斜齿轮啮合刚度计算精度,本文在传统能量法和切片法基础上,提出一种考虑局部接触状态的斜齿轮时变啮合刚度计算方法.该方法综合考虑齿根过渡曲线、渐开线齿廓及不同齿数条件下基圆与齿根圆位置关系,并进一步引入局部初始间隙和接触状态系数,对沿齿宽方向切片的实际承载状态进行判别,从而修正传统切片法中理论接触切片全部参与承载的假设.通过与有限元法对比,验证了所提方法的准确性.在此基础上,分析齿宽和螺旋角对啮合刚度的影响规律,并将所得时变啮合刚度引入齿轮转子系统动力学模型,采用 Newmark 法求解系统动态响应.结果表明,所提方法能够更合理地描述斜齿轮啮合刚度的周期性变化;系统响应主要受啮合频率及其倍频影响,并在高转速下表现出更明显的高频振动和非线性特征.
Abstract:
Time-varying mesh stiffness is a key internal excitation affecting the vibration and dynamic re-sponse of gear transmission systems.To improve the accuracy of helical gear mesh stiffness calculation,an analytical model considering the local contact state is proposed based on the improved energy method and the slicing method.In the proposed model,the effects of the tooth root transition curve,involute tooth profile,and the positional relationship between the base circle and root circle are considered in the calculation of local slice stiffness.Furthermore,an equivalent initial clearance and a contact-state coef-ficient are introduced for each slice along the tooth width,so that only the slices satisfying both the theo-retical meshing condition and the actual contact condition contribute to the total mesh stiffness.This mod-ification enables the model to describe local separation,load bias,profile modification,lead modifica-tion,and installation error effects more reasonably than the conventional direct stiffness superposition method.The proposed method is verified by comparison with finite element results.The influences of tooth width and helix angle on time-varying mesh stiffness are then analyzed.Finally,the obtained mesh stiffness is introduced into a gear-rotor dynamic model,and the dynamic response is solved using the Newmark method.The results show that the proposed model can more accurately reflect the periodic variation of helical gear mesh stiffness,and the system response is mainly dominated by the mesh fre-quency and its harmonics.With increasing rotational speed,high-frequency vibration components and nonlinear dynamic characteristics become more significant.
刊 名 节能技术 ISTIC
年,卷(期): 2026, 44(4)
分类号: TH132
机标分类号: TH132.41 U461.4 TU375.4
在线出版日期: 2026年9月20日