蒸汽吹灰喷嘴结构与工况对射流特性影响研究
The Influence of Steam Soot Blowing Nozzle Structure and Operating Conditions on Jet Characteristics
摘要
针对蒸汽吹灰过程中射流能量衰减快、有效吹灰距离受限的问题,本文基于瞬态数值模拟方法,研究了喷嘴扩张角与进口压力对蒸汽吹灰射流特性及吹灰效果的影响规律.结果表明,喷嘴扩张角主要影响射流膨胀过程及能量保持能力,其中约15°的扩张角可有效延长射流高能核心区,在不显著提高峰值冲击压力的前提下获得最大的有效吹灰距离.进口压力是决定吹灰效果的关键因素,随着压力由8 MPa 提高至 20 MPa,射流峰值冲击压力和有效吹灰距离均显著增加.综合考虑吹灰效率与受热面安全性,推荐采用 15°喷嘴扩张角并匹配 1.6~20 MPa 的进口压力.研究结果可为蒸汽吹灰器的结构设计与运行参数优化提供参考.
Aiming at the problems of fast jet energy decay and limited effective soot blowing distance in the process of steam soot blowing,the influence of nozzle expansion angle and inlet pressure on the char-acteristics of steam soot jet and soot blowing effect is studied based on transient numerical simulation method.The results show that the expansion angle of the nozzle mainly affects the expansion process and energy retention ability of the jet,and the expansion angle of about 15° can effectively extend the high-energy core area of the jet,and obtain the maximum effective soot blowing distance without significantly increasing the peak impact pressure.The inlet pressure is a key factor in determining the soot blowing effect,and as the pressure increases from 8 bar to 20 bar,the peak impact pressure of the jet and the ef-fective soot blowing distance increase significantly.Considering the soot blowing efficiency and the safety of the heating surface,it is recommended to use a 15° nozzle expansion angle and match the inlet pres-sure of 16~20 bar.The research results can provide a reference for the structural design and optimization of operating parameters of steam soot blowers.
年,卷(期):
2026, 44(4)
分类号:
TK018
机标分类号:
TK223
TK428.9
TU972.4
在线出版日期:
2026年9月20日
基金项目:
2023ZX03A01:黑龙江省重点研发计划,