Apatite discriminant criteria for ore-forming intrusions of skarn-type Fe-Cu-W polymetallic deposits in southeastern Hubei ore concentration area
摘要
鄂东南铁铜金钨钼多金属矿集区北部为以程潮-铁山-大冶铁矿等为代表的矽卡岩型铁矿矿田,中部为以铜绿山-鸡冠咀等矿床为代表的矽卡岩型铜多金属矿田,南缘自西向东发育一个由铜山口-龙角山-付家山-阮家湾矿床组成的矽卡岩型钨多金属矿床矿田,形成了"北铁中铜南钨"的格局.为厘定鄂东南矿集区这3类矽卡岩型矿床成矿岩体的差异,对成矿岩体进行矿物地球化学约束,文章选取典型矿床成矿岩体中的磷灰石开展电子探针测试.实验结果表明,3种矽卡岩矿床成矿岩体中的磷灰石均以氟磷灰石为主,并具有较高的w(SiO2)(0.06%~0.58%)和较低的w(FeO)(0~0.30%)、w(MnO)(0~0.19%),属于岩浆型磷灰石.矽卡岩型钨多金属成矿岩体中磷灰石具有最高的XOH,最低的w(Cl)(0~0.33%),以及最高的F/Cl值(8.49~130.43).矽卡岩型铜多金属矿床成矿岩体中磷灰石具有中等的XOH、w(Cl)(0.03%~0.59%)以及F/Cl值(6.15~104.19).矽卡岩型铁矿床成矿岩体中磷灰石则具有最高的w(Cl)(0.33%~1.39%),最低的XOH,以及最低的F/Cl值(1.50~9.40).利用磷灰石中的Mn含量计算3种矿床成矿岩浆在磷灰石晶出时的氧逸度,logf(O2)在-9.29~-10.81之间,表明其均形成于较为氧化的环境.矽卡岩型铁矿床成矿岩体中磷灰石具有较高的w(SO3)(0.03%~0.62%,平均0.29%),矽卡岩型钨多金属矿床成矿岩体磷灰石w(SO3)在0~0.71%之间,平均0.16%,矽卡岩型铜多金属矿床成矿岩体中磷灰石的w(SO3)在0~0.46%之间,平均0.19%.鄂东南矿集区矽卡岩型钨多金属矿床与矽卡岩型铜多金属矿床成矿岩浆样氧逸度具有相近特征,而矽卡岩型铁矿床则表现出更加氧化的特征.矽卡岩型铁矿床成矿岩体中磷灰石可能存在REE3++Si4+=Ca2++P5+取代,而其他2类矿床成矿岩体中的磷灰石则不存在该替代机制.研究表明,鄂东南矿集区矽卡岩型铁、铜、钨矿床成矿岩体的磷灰石具有显著不同的特征,可以作为不同成矿岩体的判别标志.
The southeastern Hubei ore concentration area includes the northern part of the skarn-type iron ore field rep-resented by the Chengchao,Tieshan and Daye iron deposits,the central part of the skarn-type copper polymetal-lic ore field represented by the Tonglüshan and Jiguanzui deposits,and the southern part of the skarn-type tung-sten polymetallic ore field represented from west to east by the Tongshankou,Longjiaoshan,Fujiashan and Ruan-jiawan deposits,forming a distinct metallogenic pattern of"iron in the north,copper in the middle,and tungsten in the south".Apatite from the ore-forming intrusions of representative deposits was analyzed by EPMA to estab-lish mineralogical and geochemical constraints on the differentiation among the three types of skarn deposits in the Southeastern Hubei ore concentration area.Electron probe microanalysis(EPMA)data shows that apatites from all ore-forming intrusions are characterized by high w(SiO2)(0.06%~0.58%)and low w(FeO)(0~0.30%)and w(MnO)(0~0.19%),identifying them as fluor-apatite and magmatic apatite.Apatites from skarn W deposits ex-hibit the highest XOH,the lowest w(Cl)(0~0.33%),and the highest F/Cl ratios(8.49~130.43).Apatites from skarn Cu deposits display moderate XOH and w(Cl)(0.03%~0.59%)with F/Cl ratios ranging from 6.15 to 104.19.Apa-tites from skarn Fe deposits are distinguished by the lowest XOH,the highest w(Cl)(0.33%~1.39%),and the lowest F/Cl ratios(1.50~9.40).The Mn contents in apatite were used to calculate the oxygen fugacity of ore-forming magmas for the three types of deposits at the time of apatite crystallization.The logf(O2)values range from-10.81 to-9.29,indicating that all these deposits formed under relatively oxidized conditions.Apatites from skarn Fe deposits show higher w(SO3)(0.03%~0.62%,average 0.29%)than those from skarn W deposits(0~0.71%,average 0.16%)and skarn Cu deposits(0~0.46%,average 0.19%).The formation of apatite in ore-bearing intrusions of skarn Fe deposits is linked to a higher oxidizing environment.Regarding charge-balance mecha-nisms,apatites from skarn Fe deposits likely involve a coupled substitution of REE3++Si4+=Ca2++P5+,which is ab-sent in the other two deposit types.Collectively,this study demonstrates that apatites from skarn-Fe,-Cu,and-W deposits possess distinct geochemical fingerprints.These signatures may serve as robust discriminants for differ-entiating diverse intrusive systems in the Southeastern Hubei ore concentration area.