Anthropogenic CO2 emissions reached 41.6 billion tons in 2024,a 2%increase from 2023,with nearly 90%derived from fossil fuels.This excessive emission triggers severe environmental crises,including global warming,sea-level rise,and frequent extreme weather events.To address this,China has proposed the"dual carbon"strategy(carbon peaking and carbon neutrality),which aims to achieve a balance between greenhouse gas emissions and absorption through policy measures and technological innovation.Among the key technologies for this strategy,carbon capture,utilization,and storage(CCUS)is critical,and CO2 adsorption stands out as an efficient capture method.However,current adsorbents such as amine-grafted solids,metal-organic frameworks(MOFs),and carbon-based materials face challenges of high cost,low selectivity,and poor thermal stability,limiting their industrial application.
Zeolites,especially SAPO-34 with regular pores and a cage-like CHA topological structure,exhibit superior adsorption performance due to their reversible CO2 adsorption enabled by a weaker electric field gradient than aluminosilicate zeolites.Previous studies have explored modifying SAPO-34 with monovalent cations,but the effects of high-valence metal cations on its adsorption performance,as well as the adsorption mechanism for multi-component gases,remain understudied.
Metal cations with different valence states(Li+,Na+,K+,Mg2+,Ca2+,Sr2+,Ba2+)were incorporated into the SAPO-34 zeolite framework via ion-exchange.Pristine SAPO-34 was synthesized hydrothermally:a mixture of 9.2 g H3PO4(85%),5.6 g pseudo-boehmite(80%),and 11.7 g deionized water was stirred at room temperature for 1 h;4.8 g silica sol(30%)and 47.12 g TEAOH(25%)were then added,followed by 24 h of stirring.The gel was crystallized in a 200 mL Teflon-lined autoclave at 473 K for 48 h,filtered,washed,dried at 353 K for 8 h,and calcined at 823 K for 4 h.Modified samples(X-SAPO-34-Y,X:cation,Y:exchange cycles)were prepared by stirring pristine SAPO-34 with 1 mol/L metal chloride solutions at 333 K for 4 h,followed by washing,drying,and calcination.
The effects of ion modification on the morphology and structure of SAPO-34 were systematically examined using X-ray diffraction(XRD),N2 adsorption-desorption isotherms,scanning electron microscopy(SEM),and X-ray fluorescence spectroscopy(XRF),showing that modified SAPO-34 retained its characteristic XRD peaks and cubic morphology without impurities.However,the specific surface area decreased from 680 m2/g(pristine)to 487 m2/g(Na+-modified)and 566 m2/g(Ca2+-modified),indicating altered pore structures.
Dual-component dynamic breakthrough experiments at 298 K and 101.3 kPa.The experimental results demonstrated that cation modification consistently enhanced the CO2 adsorption capacity of SAPO-34 in all cases.Among them,the Na+-exchanged SAPO-34 exhibited the highest CO2 uptake of 1.751 mmol/g,representing a 30%increase relative to the unmodified sample,while the adsorption selectivity reached 9.414,corresponding to a 40%improvement.Performance declined with increasing cation radius(e.g.,Ba2+-modified samples showed lower capacity than Na+-modified ones)and exchange cycles:Na-SAPO-34-3 had a capacity of 1.642 mmol/g,and Li+-modified samples with three cycles exhibited a 69.14%selectivity drop,attributed to reduced crystallinity and pore blockage.
Avrami kinetic model fitting(R2>0.99)indicated that the Avrami exponent n ranged between 1 and 2,suggesting two-dimensional diffusion-controlled physical adsorption.Adsorption rate constants increased with temperature,and Na-SAPO-34-1 had a lower activation energy,facilitating CO2 adsorption.The Virial equation(R2>0.999)calculated adsorption heats(2-40 kJ/mol),confirming physical adsorption;Na+-modified samples had higher heats,indicating stronger adsorbent-adsorbate interactions.
In conclusion,cation modification effectively improves SAPO-34's CO2/N2 separation performance,with Na-SAPO-34-1 being the optimal adsorbent.CO2 adsorption on SAPO-34 is primarily physical,influenced by cation properties and zeolite structure.This study provides valuable insights for developing high-performance zeolite-based CO2 adsorbents.