军事知识服务平台
低品位氧化铜矿湿法冶炼阴极铜质量影响因素及控制策略
Influencing factors and control strategies for cathode copper quality in hydrometallurgical processing of low-grade copper oxide ore
摘要 针对低品位氧化铜矿湿法冶炼生产阴极铜过程中料液杂质含量高、阴极铜A级品合格率偏低的问题,开展了系统的生产工艺优化研究.通过优化矿石配比与高效浓密机操作参数,在保障铜回收率的同时显著降低了浸出料液中的杂质浓度;改进萃取工艺参数与操作规程,并引入三相物压滤工序,有效减少了有机相夹带,保障了反萃后液质量;实施电贫液开路、优化添加剂加入制度及增设电积液净化设备,进一步提升了电积过程的电积液质量与运行稳定性.集成措施实施后,萃取系统非计划停产得以避免,电积液悬浮物浓度稳定控制在20 ppm(1 ppm≈1 mg·L-1)以下,SiO2含量由1.6 g·L-1降至0.42 g L-1,阴极铜A级品率由88.63%提高至97.15%.本研究为同类型低品位氧化铜矿的湿法冶炼流程优化与阴极铜质量提升提供了切实可行的技术路径与实践参考.
Abstract:
To address the problems of high impurity content in process solutions and low A-grade cathode copper qualification rate during the hydrometallurgical production of cathode copper from low-grade copper oxide ore,a systematic process optimization study was carried out.By optimizing ore blending ratios and the operation parameters of high-efficiency thickeners,the impurity concentration in the leach liquor was significantly reduced while ensuring copper recovery.Improvements in extraction process parameters and operating procedures,together with the introduction of a three-phase material filter-pressing step,effectively minimized organic phase entrainment and ensured the quality of the stripped electrolyte.Implementation of spent electrolyte bleeding,optimization of additive dosing,and installation of electrolyte purification equipment further enhanced the electrolyte quality and operational stability of the electrowinning process.Following the implementation of these integrated measures,unplanned shutdowns of the extraction system were avoided,the suspended solids concentration in the electrolyte was stably maintained below 20 ppm(1 ppm≈1 mg·L-1),the SiO2 content decreased from 1.6 g·L-1 to 0.42 g·L-1,and the A-grade cathode copper qualification rate increased from 88.63%to 97.15%.This study provides a viable technical pathway and practical reference for process optimization and cathode copper quality improvement in hydrometallurgical processing of similar low-grade copper oxide ores.
刊 名 矿冶 ISTIC
年,卷(期): 2026, 35(4)
分类号: TF811
机标分类号: P228.4 TD952 TM712
在线出版日期: 2026年9月15日
基金项目: 2022YFC2904604:国家重点研发计划,