二水/半水-无水湿法磷酸工艺改造及实践
Process modification and practice of dihydrate/hemihydrate-anhydrous wet-process phosphoric acid technology
摘要
针对传统湿法磷酸副产二水/半水石膏杂质含量高、总水含量高导致后端烘干能耗大及不利于资源化利用的问题,提出二水/半水-无水湿法磷酸工艺改造方案.通过解析石膏晶型转变及磷、氟杂质迁移机制,结合工程改造实践,对比分析表明:改造后磷收率由94%~96%提升至99%以上,副产无水石膏w(P2O5总)降至0.15%、w(F总)降至0.08%、w(H2O总)降至17.71%,接近天然硬石膏品质;吨P2O5蒸汽消耗降为0,石膏烘干煤耗较二水石膏降低70%以上,较半水石膏降低50%以上;吨无水石膏改造投资仅100~150元,经济效益显著.该工艺为磷石膏源头减量与高值化利用提供了技术支撑.
To address the issues of high impurity content and total moisture in traditional wet-process phosphoric acid byproducts(dihydrate/hemihydrate gypsum)leading to high energy consumption in subsequent drying processes and unfavorable for resource utilization,a dihydrate/hemihydrate-anhydrous wet-process phosphoric acid process modification scheme is proposed.By analyzing the crystal phase transformation of gypsum and the migration mechanisms of phosphorus and fluorine impurities,combined with engineering modification practices,comparative analysis demonstrates that the phosphorus recovery rate is increased from 94%-96%to over 99%.The total P2O5 content in the byproduct anhydrous gypsum is decreased to 0.15%,total F content is decreased to 0.08%,and total water content is decreased to 17.71%,approaching the quality of natural anhydrous gypsum.The steam consumption for per ton of P2O5 is dropped to zero,and the coal consumption for gypsum drying is reduced by 70%and 50%compared to the dihydrate gypsum and hemihydrate gypsum.The investment for modifying one ton of anhydrous gypsum is only 100-150 RMB Yuan,yielding significant economic benefits.This process provides technical support for the source reduction and high-value utilization of phosphogypsum.
年,卷(期):
2026, 41(9)
分类号:
TQ126.3+5
机标分类号:
TQ177.374
X705
TU526
在线出版日期:
2026年10月12日