Operational optimization of Rizhao Steel No.5 BF based on the cohesive zone-dead man model
摘要
日钢5号高炉开炉后炉况相对稳定,日产量在7500t/d以上,燃料比在515kg/t左右,但随着外围原燃料条件变差,炉况稳定性也变差,技术经济指标持续下滑.基于软熔带-死焦堆模型,围绕死焦堆与软熔带之间距离的三个关键因素,即软熔带根部位置、死焦堆透气性和风口活化区面积占比,重点对边沿矿焦比、炉腹煤气量指数、实际风速和风口活化区面积占比等操作参数进行优化调整,炉况抗波动能力明显增强,技术经济指标逐渐改善.在入炉品位维持在55%以下、顶装干熄焦比例降低至15%的条件下,5号高炉日产量恢复至7500t/d以上,燃料比降低至520 kg/t以下.
The condition of Rizhao Steel No.5 blast furnace remains stable relatively after blow on,and the furnace daily out-put is over 7500t/d with fuel rate of 515kg/t approximately.However,the stability of the furnace condition becomes worse as external conditions worsen,and the techno-economic indicators keep declining.Based on the cohesive zone-dead man model,some operational parameters,including the ore-to-coke ratio at the furnace edge,the bosh gas volume index,the actual blast velocity,and the proportion of the annular area of the tuyere raceway are optimized and adjusted around on the three key factors that influence the distance between the dead man and the cohesive zone,i.e.the position of the cohesive zone root,the permeability of the dead man,and the proportion of the annular area of the tuyere raceway.As a result,the furnace's resistances against the fluctuation of the external conditions are significantly enhanced,and the techno-economic indicators gradually improved.Under the conditions that the charged ore grade is below 55%and the proportion of dry quenched coke falls to 15%,the daily output of the furnace returns to over 7 500 t/d,and the fuel rate drops to below 520kg/t.