摘要
针对板式胞元材料,系统性探究了其自身以及其应用于方形管填充结构的吸能性能(EAP),并在此基础上,建立了点阵填充结构的耐撞性优化设计模型.结果表明,在三种基本胞元中,FCC板式胞元具有最佳的综合EAP.当承受三点弯曲载荷时,薄壁管的曲率和填充胞数并不能明显提升EAP;增大壁厚可以提升能量吸收比(SEA),但是壁厚对峰值破碎力(PCF)的影响较大,壁厚增大,PCF增大;增加相对密度,可以增加SEA和PCF,但其吸能稳定性呈现出先增强再减弱的趋势;在考虑密度分布时,将更多的材料放在中间部位结构的EAP更好.当承受轴向载荷时,曲管相较于直管其SEA更低,同时吸能稳定性也更差;当载荷为斜加载时,倾斜角度较小则对结构的EAP影响也较小;增加单胞数会降低填充结构的EAP,但是可以提升吸能稳定性.同时,本文所提的优化模型可以较大提升设计结构的EAP.
The energy absorption performance(EAP)of plate-lattices was systematically investigated,both independently and when applied to square-tube filling.Based on this,an optimization design model for the crashworthiness of lattice-filled structures was established.The results indicate that among the three basic plate-lattices,the FCC has the best overall EAP.When subjected to three-point bending loads,the curvature of thin-walled tubes and the number of filling cells do not significantly enhance EAP;increasing the wall thickness can improve the specific energy absorption(SEA),but wall thickness has a significant impact on the peak crushing force(PCF)—as the wall thickness increases,the PCF also increases;increasing the relative density can enhance both SEA and PCF,but its energy absorption stability(EAS)initially improves and then weakens.When considering density distribution,placing more material in the middle part of the structure results in better EAP.Under axial loads,curved-tubes have lower SEA and poorer EAS compared to straight-tubes;when considering oblique loading,smaller tilt angles have less impact on the EAP;increasing the number of cells reduces the EAP but can improve EAS.Additionally,the optimization model proposed in this paper can significantly enhance the EAP of the designed structure.