Preparation of Cationic Bamboo-Derived Cellulose Nanofibers based on Mechanochemical Ball Milling for Enhancing Paper Properties via Coating
摘要
为简化阳离子纳米纤维的制备工艺,并提升竹浆纸的阻隔性能和机械强度,以大叶慈(Dendrocalamus farinosus)的竹纤维残渣(bamboo fiber solid residue,BFSR)为原料,2,3-环氧丙基三甲基氯化铵(2,3-epoxypropyltrimethyl ammonium chloride,EPTAC)为阳离子醚化剂,在异丙醇/氢氧化钠(i-PrOH/NaOH)体系中采用一步机械化学球磨法对竹纤维残渣进行阳离子改性和纤丝化处理制备阳离子竹纳米纤维(cationic bamboo-derived cellulose nanofibers,CBCNF),并对CBCNF理化性质进行表征.结果表明:当EPTAC与羟基物质的量比为2.0∶1.0,球磨时间为8 h时,2-CBCNF-8的季铵基团质量摩尔浓度为0.80 mmol/g,阳离子竹纳米纤维得率达93.32%,其结晶度和热稳定性相比BFSR降低.将优化的2-CBCNF-8样品作为涂布液涂覆于竹浆纸表面,当2-CBCNF-8涂布液的涂布量为9 g/m2时,所得涂布竹浆纸的多项力学与阻隔性能较纯竹浆纸均显著提升(P<0.05),其中抗张指数、撕裂指数、耐破指数和耐折次数分别为65.50 N·m/g、16.20 mN·m2/g、6.63 kPa·m2/g和72次,较纯竹浆纸分别提高45.81%、125.63%、26.77%和105.7%倍;水蒸气透过率和透气度分别降至103.16 g/(m2·d)和0.13 µm/(Pa·s),较纯竹浆纸分别降低94.02%和96.51%;初始水接触角可达100°,按照GB/T 22805.2-2008《纸和纸板 耐脂度的测定 第2部分:表面排斥法》测定耐脂值为10.阳离子竹纳米纤维作为表面涂布液实现竹浆纸机械强度和阻隔性能的双重提升,为推动竹浆纸包装材料替代塑料包装提供理论依据.
To simplify the preparation process of cationic cellulose nanofibers and promote the mechanical strength and barrier properties of bamboo pulp paper,we developed a one-step mechanochemical ball milling method for preparing cationic bamboo-derived cellulose nanofibers(CBCNF)from bamboo fiber solid residue(BFSR)using 2,3-epoxypropyl trimethyl ammonium chloride(EPTAC)as the cationic agent in the i-PrOH/NaOH solvent.The microstructure and other physicochemical properties of CBCNF samples were characterized.The results showed that the grafting molality of quaternary ammonium groups on the fibers and yield of 2-CBCNF-8 sample were 0.80 mmol/g and 93.32%under the optimized conditions of EPTAC/hydroxyl molar ratio of 2∶1 and milling time of 8 hours.Compared with BFSR,the degree of crystallinity and thermal stability of 2-CBCNF-8 sample were reduced.When the coating weight of 2-CBCNF-8 was 9 g/m2,multiple mechanical and barrier properties of the coated bamboo pulp paper were significantly improved compared with the control base paper(P<0.05).The tensile index,tear index,burst index,and folding endurance of coated bamboo pulp paper were 65.50 N·m/g,16.20 mN·m2/g,6.63 kPa·m2/g,and 72 times,which were increased by 45.81%,125.63%,26.77%,and 1.06 times in comparison with control paper,respectively.Furthermore,the water vapor transmission rate and air permeability of coated bamboo pulp paper were decreased to 103.16 g/(m2·d)and 0.13 µm/(Pa·s),respectively,which were reduced by 94.02%and 96.51%compared with bamboo pulp paper.The water contact angle and anti-oil property of coated bamboo pulp paper were significantly improved,with an initial water contact angle of 100°,and the anti-oil Kit index of grade 10.Therefore,CBCNF coating dispersion could effectively enhance the mechanical strength and barrier properties of bamboo pulp paper,promoting use of bamboo pulp paper.