In-Situ Formation of Drug-Loaded Polymers in Bamboo for Dimensional Stabilization and pH Value Responsive Drug Release Performance
摘要
首先以壳聚糖(chitosan,CS)、甲基丙烯酸羟乙酯(2-Hydroxyethyl methacrylate,HEMA)和马来酸(maleic acid,MA)构建三元聚合物体系CS/p(HEMA-co-MA)(简称为CHM),然后将防腐剂四水合八硼酸二钠(disodium octaborate tetrahydrate,DOT)负载于CHM中得到载药聚合物CHMD,采用CHMD浸渍毛竹(Phyllostachys edulis)试样得到CHMD-B,以解决竹材尺寸稳定性差和DOT易流失等问题.采用响应面法优化聚合物CHM合成工艺,确定最佳条件为:反应温度160℃、HEMA与MA物质的量比为2∶1、反应时间2 h,所得CHM的凝胶率为98.9%,溶胀率为20.2%.多种表征方法表明CHM以氢键、酯键和酰胺键等键形成致密的三维网络结构,加入的壳聚糖提高了聚合物的热稳定性和力学强度.载药聚合物CHMD表现出明显的pH值响应释药行为,药物释放速率随pH值降低而增大,符合一级动力学模型,以扩散机制为主.CHMD可有效渗透进入毛竹的细胞腔和细胞壁中,在竹材内部原位固化.改性后竹材表面水接触角由未处理材的22.8°提高至66.5°,吸水体积湿胀率为4.3%,在3次吸水-干燥循环后抗湿胀率仍保持在57.1%.处理竹材中DOT呈现"突释"后"缓释"的双阶段释放规律,且具有pH值响应释药特性,在酸性条件下释放加快,在中性条件下释放受到抑制.与DOT单独处理材相比,CHMD-B中DOT的72 h流失率降至59.1%,抗流失率提高32.0%.CS/p(HEMA-co-MA)载药体系通过物理填充、疏水交联与响应释药三重协同作用,为竹材尺寸稳定性提升与DOT长效固着和响应释放提供一体化的解决方案.
In this paper,a ternary polymer system,CS/p(HEMA-co-MA)(CHM),was prepared from chitosan(CS),2-hydroxyethyl methacrylate(HEMA),and maleic acid(MA),and subsequently loaded with disodium octaborate tetrahydrate(DOT)to obtain a preservative-loaded polymer(CHMD).CHMD was then formed in situ within bamboo to improve its dimensional stability and reduce DOT leaching.Response surface methodology identified the optimal conditions as a reaction temperature of 160℃,an HEMA/MA molar ratio of 2∶1,and reaction time of 2 h,under which the resulting polymer exhibited a gel content of 98.9%and a swelling rate of 20.2%.Structural and physicochemical characterizations revealed that CHM formed a dense three-dimensional network structure via hydrogen bonds,ester bonds,and amide bonds.The incorporation of CS improved the thermal stability and mechanical strength of the polymer network.CHMD showed significant pH-responsive release behavior in vitro,with the release rate increasing as pH value decreased,following the first-order kinetic model and dominated by a diffusion mechanism.CHMD effectively penetrated into the bamboo cell lumens,cell walls,and intercellular spaces and was cured in situ.The modified bamboo showed enhanced surface hydrophobicity,with water contact angle increasing from 22.8° for untreated bamboo to 66.5°.The water absorption swelling rate of the treated bamboo remained below 4.3%,and the anti-swelling efficiency remained above 57.1%after three water absorption-drying cycles.The DOT release from the treated bamboo exhibited a"burst release"followed by a"sustained release"pattern,with pH-responsive behavior:release was suppressed under neutral conditions but accelerated under acidic conditions.Compared with DOT-only treated,the 72 h leaching rate of DOT in the treated bamboo decreased to 59.1%,and the anti-loss rate increased by 32.0%.In summary,the CS/p(HEMA-co-MA)-based system integrates physical filling,formation of a hydrophobic crosslinked network,and pH-responsive preservative release,providing an effective strategy for simultaneously improving the dimensional stability of bamboo,enhancing DOT retention,and enabling environmentally responsive release.