军事知识服务平台
基于热平衡仿真的新能源汽车电池托盘压铸模缩孔控制
Shrinkage porosity control of new energy vehicle battery tray die casting die based on thermal balance simulation
摘要 针对新能源汽车电池托盘压铸过程中边梁厚壁区、筋板交汇区和安装凸台根部易产生局部蓄热并诱发缩孔的问题,提出一种基于热平衡仿真的压铸模缩孔控制方法.以 AlSi10MnMg 电池托盘为研究对象,建立铸件-模具连续循环热平衡仿真模型,结合区域热平衡偏差、凝固滞后时间、孤立液相体积和补缩压力构建缩孔风险评价指标,并对分区冷却水路、点冷镶件、溢流槽及增压参数进行协同修正.结果表明,优化方案使模具稳定循环温度极差由 95.4℃降至 49.8℃,最大缩孔风险值由0.742 降至 0.346,缩孔高风险体积由 18.4 cm3 降至 4.8 cm3.测点温度仿真值与实测值平均相对误差为 2.63%.经X射线检测和局部剖切验证,安装凸台区平均缺陷面积由 51.7 mm2 降至 16.8 mm2,连续生产 X 射线合格率和气密合格率分别达到 97.3%和98.7%,可为大型薄壁电池托盘压铸模热平衡调控和缩孔缺陷控制提供参考.
Abstract:
To solve the problem that local heat accumulation easily occurs in the thick side beam area,rib intersection area and mounting boss root during die casting of a new energy vehicle battery tray and induces shrinkage porosity,a shrinkage porosity control method for die casting dies based on thermal balance simulation is proposed.An AlSi10MnMg battery tray is taken as the research object.A continuous-cycle thermal balance simulation model of the casting and die is established.A shrinkage porosity risk evaluation index is constructed by combining regional thermal balance deviation,solidification lag time,isolated liquid phase volume and feeding pressure.The zoned cooling channel,spot cooling insert,overflow groove and intensification parameter are modified cooperatively.The results show that the optimized scheme reduces the stable-cycle temperature range of the die from 95.4℃to 49.8℃,the maximum shrinkage porosity risk value from 0.742 to 0.346,and the high-risk shrinkage porosity volume from 18.4 cm3 to 4.8 cm3.The average relative error between the simulated and measured temperatures at measuring points is 2.63%.X-ray inspection and local sectioning verification show that the average defect area in the mounting boss area decreases from 51.7 mm2 to 16.8 mm2,and the X-ray qualified rate and air-tightness qualified rate in continuous production reach 97.3%and 98.7%,respectively.The method can provide a reference for thermal balance regulation and shrinkage porosity defect control of large thin-walled battery tray die casting dies.
刊 名 模具技术 ISTIC
年,卷(期): 2026, (4)
分类号: TG249.2
机标分类号: TG292 R155.5 TG115.28
在线出版日期: 2026年10月19日
基金项目: 25GG005:陕西省教育厅关于陕西高等职业教育教学改革研究项目,