Technical optimization of preparation process for pyraclostrobin·epoxiconazole 17%nanosuspension concentrate
摘要
[目的]开发17%唑醚·氟环唑纳米悬浮剂的最佳制备工艺,并评价其田间应用效果.[方法]采用湿法介质研磨技术制备纳米悬浮剂,以粒径D90、析水率和储存稳定性为指标,对分散剂组合、增稠剂种类及用量、砂磨参数进行优化筛选,并进行实验室小试、小试放大验证测定各项理化指标.[结果]最终确定300 mL实验室小试体系:吡唑醚菌酯12.3%、氟环唑4.7%、分散剂TFS-IE4 4%、TFS-R100 2%、TFS-M4 1%、黄原胶Z-04 0.3%、硅酸镁铝0.5%、尿素4%、消泡剂6330 0.5%、苯甲酸钠0.3%、水补足至100%;砂磨时间2 h、转速800 r/min.6 L小试放大体系最佳配方调整为分散剂TFS-IE4:TFS-R100:TFS-M4为5:2.5:1,砂磨时间调整为4 h.该工艺具备良好的粒径控制能力与稳定性.田间药效试验显示,该纳米悬浮剂对玉米弯孢叶斑病、玉米穗腐病防效显著;在相同有效成分用量下,其防效优于市售常规剂型,且中剂量处理即可达到市售高剂量水平的防治效果,复配处理表现出较好的综合防效.[结论]经砂磨时间和分散剂配比重新优化后,该工艺在6L小试放大体系中仍表现出较好的粒径控制能力和稳定性,可为复配杀菌剂纳米制剂的研发与产业化生产提供参考.
[Aims]This study aims to develop the optimal preparation process for a pyraclostrobin·epoxiconazole 17% nanosuspension concentrate(NSC)and evaluate its field application efficacy.[Methods]The NSC formulation was prepared via wet media milling technology.Key parameters,including combinations of dispersing agents,types and dosages of thickeners,and sand milling conditions,were optimized using particle size D90,water separation rate,and storage stability as evaluation indices.Laboratory-scale and scale-up validation tests were conducted to characterize the physicochemical properties of the formulation.[Results]The optimal laboratory-scale(300 mL)formulation was determined as follows:pyraclostrobin 12.3%,epoxiconazole 4.7%,dispersants TFS-IE4 4%,TFS-R100 2%,TFS-M4 1%,xanthan gum Z-04 0.3%,magnesium aluminum silicate 0.5%,urea 4%,defoamer 6330 0.5%,sodium benzoate 0.3%,and water to make up 100%(w/w).The sand milling time was 2 h at a rotation speed of 800 r/min.For the 6 L scale-up,the optimal dispersant ratio was adjusted to TFS-IE4:TFS-R100:TFS-M4=5:2.5:1,with a sand milling time of 4 h.This process exhibited superior particle size control capability and stability.Field efficacy trials demonstrated that the NSC formulation provided significant control of Curvularia leaf spot and ear rot of maize.At equivalent active ingredient dosages,its control efficacy was superior to that of commercial conventional formulations;notably,the medium-dosage treatment achieved control effects comparable to the high-dosage level of commercial products,and the compound formulation showed good overall control performance.[Conclusions]After re-optimization of the sand milling time and dispersant ratio,the process still exhibits good particle size control and stability in the 6 L scaled-up system,providing a reference for the research and industrial production of nano-formulations of compound fungicides.