军事知识服务平台
基于熵产理论与Omega涡识别方法的污泥泵能量损失机理
Investigation on energy loss mechanism of sludge pumps based on entropy generation theory and Omega vortex identification method
摘要 以某型污泥泵为研究对象,在清水工况下进行原污泥泵与新型污泥泵的数值与试验分析.基于熵产理论对泵内不可逆能量损失进行定量分解,并结合 Omega 涡识别方法刻画旋涡结构演化特征,系统分析进口几何匹配状态变化对能量耗散分布及流动结构特性的影响规律.结果表明:在设计工况下,新型污泥泵效率由 42.4%提升至 64.5%;能量损失主要集中于叶轮与蜗壳区域的湍流耗散,与原污泥泵相比,总熵产降低约 30%;高耗散区域的减弱与旋涡结构强度及空间尺度的衰减呈现一致趋势,流道内流动稳定性得到提升.
Abstract:
A representative sludge pump was taken as the research object and investigated under clear-water conditions through numerical simulations and experimental validation,involving both the original and a modified configuration.Entropy generation theory was employed to quantitatively decompose irre-versible energy losses within the pump,while the Omega vortex identification method was applied to characterize vortex evolution.The influence of changes in inlet geometric matching conditions on energy dissipation distribution and flow structure characteristics was then systematically analyzed.The results indicate that,under the design operating conditions,the efficiency of the modified sludge pump increa-ses from 42.4%to 64.5%.Energy losses are predominantly governed by turbulent dissipation in the im-peller and volute regions.Compared with the original sludge pump,total entropy generation is reduced by approximately 30%.The reduction in high-dissipation regions is consistent with the attenuation of the vortex structure′s intensity and spatial extent,leading to enhanced flow stability within the flow channel.
刊 名 排灌机械工程学报 ISTICPKU
年,卷(期): 2026, 44(10)
分类号: S277.9 TH311
机标分类号: V439.2 TP452 TB872
在线出版日期: 2026年11月6日
基金项目: 2024M751272:中国博士后科学基金面上资助项目,