Sediment erosion and wear of mixed-flow hydro-turbines based on coarse-grained model
摘要
为研究水轮机内泥沙颗粒动力学特性对多相介质耦合磨损机制的影响,应用离散元与计算流体力学耦合的方法,以真实泥沙颗粒形状求解含沙水流条件下混流式水轮机内部颗粒-流体系统.针对细沙颗粒数量庞大的问题,基于粗粒化模型与单图形处理器(graphics processing unit,GPU)加速,降低计算模拟成本,实现 DEM-CFD 耦合.结果表明:泥沙注入后在水轮机主流道内表现出复杂的运动特性,受重力及旋转离心力影响,泥沙颗粒与水流相互作用后在转轮及尾水管水平扩散段内的分布不均匀性显著;固定导叶冲蚀磨损主要发生在鼻端隔舌处,活动导叶冲蚀磨损主要发生在前缘端面中间及后缘尾部上方,活动导叶磨痕深度大于固定导叶,转轮叶片工作面冲蚀磨损发生在叶片进水边,磨痕随时间持续扩展加深;比较颗粒撞击产生的剪切功率最大值,多面体颗粒引起的冲蚀磨损程度高于球体颗粒,转轮叶片冲蚀磨损程度高于导水机构.研究结果对混流式水轮机的抗磨设计及优化模拟具有参考意义.
To investigate the influence of the dynamic characteristics of sediment particles inside a hydro-turbine on the multiphase media coupled wear mechanism,a coupled method of discrete element and computational fluid dynamics was applied to solve the particle-fluid system inside a mixed-flow hydro-turbine under sediment-laden water flow conditions using real sediment particle shapes.To ad-dress the large number of fine sand particles,a coarse-grained model and single-GPU acceleration were used to reduce computational simulation costs and achieve DEM-CFD coupling.The results show that after sediment injection,it exhibits complex motion characteristics in the main flow channel of the hydro-turbine.The distribution of sediment particles in the runner and in the horizontal diffuser section of the draft tube is significantly uneven due to the interaction between sediment particles and the water flow,which is affected by gravity and rotational centrifugal force.The erosion wear of stay vanes mainly occurs at the nose tongue,while the erosion wear of guide vanes mainly occurs in the middle of the lea-ding edge and above the tail of the trailing edge.The erosion wear of guide vanes is heavier than that of stay vanes.The erosion wear of the working surface of the runner blades occurs at the inlet edge of the blades,and the wear marks gradually develop and increase over time.Comparing the maximum shear power generated by particle impact,the wear caused by polyhedral particles is heavier than that of spherical particles,and the wear of runner blades is heavier than that of the distributor.The research results of this study provide a significant reference for the anti-wear design and optimization simulation of mixed-flow hydro-turbines.