军事知识服务平台
千米级铁路钢桁梁桥数字化拼装技术研究与应用
Research and Application of Digital Assembly Technology for Steel Truss Rail Bridge with Main Span Length over 1000 m
摘要 为提高千米级铁路钢桁梁桥线形控制精度,提出千米级铁路钢桁梁桥数字化拼装技术.该技术首先采用三维激光扫描与高精度激光跟踪测量相结合的方法,获取桁段端部螺栓孔群细部点云和整体空间坐标信息,建立兼具局部细节精度与整体空间精度的桁段逆向模型;然后结合温度场分析和力学修正,建立桁段设计无应力状态对比模型;最后采用相邻桁段数字化拼装分析预测当前节段拼装后的高程偏差、横弯偏差及扭转趋势,并将线形偏差转化为拼装前调整量,实现拼装误差主动调控.以某千米级公铁两用钢桁梁桥为背景,进行可行性验证及实际应用.成桥线形监测结果表明:中跨最大偏差为49mm,仅为限值235mm的21%;60m弦测偏差为27mm<限值40mm;200m波形不平顺为26mm<限值50mm,以上结果均显著优于规范要求.验证了该技术在钢桁梁分阶段成形线形控制中的可行性,表明该技术能够提前识别并消除当前节段拼装偏差,避免局部误差继续向后传递.
Abstract:
This paper presents a digital assembly technology for steel truss rail bridge with main span length over 1 000 m,which can improve the truss alignment control accuracy for the bridge during staged construction.Firstly,the handheld 3D laser scanning and high-precision laser tracker measurement are conducted to acquire detailed point cloud data of bolt hole groups at both ends of the truss segment as well as the overall spatial coordinate information.A reverse engineering-based model of the truss segment with both local detail accuracy and overall spatial accuracy is then established.Secondly,a comparison model of the truss segment in the design unstressed state is established through temperature field analysis and mechanical correction.Finally,the digital assembly of adjacent truss segments is analyzed to predict the elevation deviation,lateral deflection deviation and torsional tendency of the truss segment being erected,the alignment deviation is converted into the adjustment amount before assembly,to achieve adaptive adjustment of assembly errors.The main navigation channel bridge of a steel truss rail-cum-road bridge is used as a case for verification.The maximum midspan alignment deviation is 49 mm,only 21% of the limit value of 235 mm.The 60 m chord measurement deviation is 27 mm,less than the limit value of 40 mm.The 200 m profile irregularity is 26 mm,lower than the limit value of 50 mm.All the measured deviations are less than the code suggested values,indicating that the presented technology is applicable for the alignment control of steel trusses during staged construction,helping identify and eradicate the assembly errors of the segment being erected and preventing local errors from being transmitted to subsequent segments.