增设钢盖梁独柱墩桥梁的抗倾覆稳定性系数验算方法研究
Research on Anti-Overturning Stability Coefficient Verification Method for Single-Column-Pier Bridge Retrofitted with Steel Cap Beams
摘要
针对现行《公路钢筋混凝土及预应力混凝土桥涵设计规范》(JTG 3362-2018)抗倾覆验算方法难以适配增设钢盖梁独柱墩桥梁复杂失效机制与非线性响应的问题,基于几何失稳与强度破坏双重失效模式竞争机制,提出一种适用于增设钢盖梁独柱墩桥梁的抗倾覆稳定系数验算方法.该方法在现行规范方法的基础上考虑钢盖梁实际力学响应,构建多尺度多单元有限元模型,量化钢盖梁刚度对支座反力重分布的影响.为验证文中所提方法的可行性,以采用增设钢盖梁方式提升抗倾覆性能的某城市互通立交匝道桥为背景,采用该方法计算桥梁抗倾覆稳定性系数,并与现行规范方法的计算结果进行对比.结果表明:该方法计算得到的抗倾覆稳定性系数较现行规范方法降低约17.9%,能够更精准地反映结构改造后的抗倾覆安全冗余度,可为增设钢盖梁提升独柱墩桥梁抗倾覆能力的方案设计提供可靠的理论借鉴与工程参考.
This study presents an anti-overturning stability coefficient verification method for the single-column-pier bridge retrofitted by adding steel cap beams,grounded on the competing mechanisms of geometric instability and strength failure in dual failure modes.The method is a supplement to the anti-overturning verification catalogue in the Specifications for Design of Highway Reinforced Concrete Bridges and Culverts(JTG 3362-2018)that suggests the anti-overturning verification method that does not suits the single-column-pier bridge with additional steel cap beams that reveals complicated failure mechanism and non-linear responses.The presented method takes into account the actual mechanical responses of steel cap beams,together with multi-scale finite element modeling,quantifying the influence of the stiffness of the steel cap beam on the redistribution of reaction forces of bearings.In the case study of a ramp of an urban interchange,the anti-overturning stability coefficient calculated by the presented method is 17.9%lowered than that calculated by the method suggested in JTG 3362-2018,which more accurately reflects the anti-overturning safety redundancy of the bridge after retrofit,offering insight into the design to improve the anti-overturning performance of the single-column-pier bridge by adding steel cap beams.
年,卷(期):
2026, 56(4)
分类号:
U448.15
U441
机标分类号:
U445
TU311.2
TU4
在线出版日期:
2026年9月7日