军事知识服务平台
复合加载作用下支点摩擦对深梁断裂试样应力场的影响研究
Study on the effect of fulcrum friction on the stress field of deep beam fracture specimens under different combined loading conditions
摘要 为研究支点摩擦作用对岩石材料单边缺口深梁(NDB)试样 I/II 复合加载下断裂行为的影响,使用有限元软件 ABAQUS 进行数值模拟,在三种不同的复合加载型式下,考虑裂缝倾角 β、裂缝长度 a/W、支座跨距 S2/L、裂缝距中心的距离 c1 和支点摩擦系数 f,建立了180 个NDB 试件的数值模型,并对三种NDB试件的无量纲断裂参数(YI、YII 和T∗)进行了标定.结果表明:对于不考虑支点摩擦时,NDB-OC 试样的YI和 T∗随着 β 的增大而减小,YII 随着 β 的增大呈现先增大后减小的趋势;NDB-AS 试样的 YI 随着 S2/L 的增加而增大,YII 和 T∗随着 S2/L 的增大而减小;NDB-EC 试样的 YI 随着 c1/L 的增大逐渐减小,YII 随着c1/L 的增大而增大,当a/W 为0.4 和0.5 时,T∗值随着c1/L 的增加而下降,当a/W 为0.6 时,T∗值随着c1/L 的增加而上升.考虑支点摩擦后,三种 NDB 试样的 YI、YII 和 T∗值均发生了不同程度的减小,且随着 a/W 的增大,摩擦系数 f 对其的影响更为显著;支点摩擦可以显著改变岩石裂纹尖端的加载模式.
Abstract:
To investigate the influence of fulcrum friction on the fracture behavior of rock specimens under combined loading in the Notched Deep Beam(NDB)I/II tests,numerical simulations were conducted using the finite element software ABAQUS.Under three distinct combined loading configurations,numerical models were established for 180 NDB specimens,accounting for crack inclination angle β,crack length a/W,support span ratio S2/L,crack distance from center c1,and support friction coefficient f.The numerical models calculated the dimensionless fracture parameters(YI,YII,and T∗)for all 180 NDB specimens.The results indicate that for specimens without support friction,YI and T∗ of NDB-OC specimens decrease with increasing β,while YII first increases,then decreases with increasing β.For NDB-AS specimens,YI increases with increasing S2/L,while YII and T∗ decrease with increasing S2/L.For NDB-EC specimens,YI gradually decreases with increasing c1/L,while YII increases with increasing c1/L.When a/W is 0.4 and 0.5,T∗ decreases with increasing c1/L;when a/W is 0.6,T∗ increases with increasing c1/L.After accounting for fulcrum friction,the values of YI,YII,and T∗ for all three NDB specimens decrease to varying degrees.The influence of the friction coefficient f on these values becomes more pronounced with increasing a/W.Fulcrum friction significantly alters the loading pattern at the rock crack tip.
刊 名 水道港口 ISTIC
年,卷(期): 2026, 47(4)
分类号: TU45
机标分类号: TU452 TG146.2 U451.2
在线出版日期: 2026年9月16日
基金项目: 52109113:国家自然科学基金LSDP202101:水利部研究中心开放基金项目SLK2021A07:水利水运工程教育部重点实验室开放基金项目CQSLK-202306:重庆市水利科技项目,