Vanadium-microalloyed Fe-0.2C-5Mn-2.5Al-0.3Si-0.1V(mass fraction,%)medium-manganese steel was subjected to sub-critical quenching.Specifically,the 1.5 mm-thick steel sheets were heated to 710,730 and 750℃,held for 3 min and cooled in water,respectively.After this,the steel sheets were tested for microstructure and mechanical properties via scanning electron microscope,transmission electron microscope,X-ray diffractometer,and tensile testing machine.The yield strength model incorporating solution strengthening,grain boundary strengthening,dislocation strengthening,and precipitation strengthening was established,and the yield strength of the tested steel was calculated.The results indicated that(a)the essential structures were δ-ferrite,massive ferrite,massive and lath retained austenites,and nano-sized precipitated phases in the steel quenched from 710 and 730℃,and were ferrite,retained austenite and martensite-austenite island in the steel quenched from 750℃;(b)the steel quenched from 710℃exhibited the best strength and ductility,yield strength being 896 MPa,tensile strength being 1 014 MPa,and elongation being 42.2%;and(c)the strengthening mechanisms of the tested steel were the precipitation strengthening caused by the nano-sized vanadium carbides dispersed in the matrix and the high-density dislocation strengthening introduced by cold rolling.