军事知识服务平台
热轧中碳钢板脱碳行为及其影响因素研究
Decarburization Behavior and Factors Influencing It for Hot-Rolled Medium-Carbon Steel Plate
摘要 表面脱碳是热轧中碳钢板的常见缺陷.对比了钢厂生产的热轧中碳钢板不同部位的脱碳层形貌,研究了加热温度和低氧气氛对热轧中碳钢板脱碳行为的影响.结果表明:700℃加热的中碳钢板形成全脱碳层,800℃加热的钢板全脱碳层与部分脱碳层共存,900℃加热的钢板仅形成部分脱碳层;低氧气氛能显著抑制钢板脱碳;钢板尾部边缘因温度较高、氧含量较高,脱碳最严重.此外,增加Si 含量会加剧钢板脱碳,增加Cr 含量可明显减小脱碳层深度.
Abstract:
Surface decarburization is a common defect of hot-rolled medium-carbon steel plate.The forms of decarburized layers at different positions of hot-rolled medium-carbon steel plate produced by steel plant were compared,and the effects of heating temperature and low-oxygen atmosphere on decarburization behavior of hot-rolled medium-carbon steel plate were investigated.The results showed that(a)a fully decarburized layer formed in the medium-carbon steel plate heated at 700 ℃,fully and partially decarburized layers coexisted in the steel plate heated at 800 ℃,and only a partially decarburized layer formed in the steel plate heated at 900 ℃;(b)the low-oxygen atmosphere could significantly inhibit decarburization of the steel plate;and(c)the tail edge of the steel plate exhibited the most severe decarburization due to higher temperature and higher oxygen content.Additionally,it was found that an increase in Si content was likely to aggravate decarburization of the steel plate,and an increase in Cr content enabled the decarburized depth to be significantly reduced.
刊 名 上海金属 ISTIC
年,卷(期): 2026, 48(5)
分类号: TG142.15
机标分类号: TG161 O614.353 TF704.5
在线出版日期: 2026年9月30日