2.5%Mn-0.2%Si超高强度钢板镀锌层黏附力分析
Analysis on Adherence of Zinc Coating on 2.5%Mn-0.2%Si Ultra-high Strength Steel Sheet
摘要
采用扫描电子显微镜、双束聚焦离子束显微镜和辉光光谱仪研究了经预氧化+还原和预氧化+炉区内氧化的2.5%Mn-0.2%Si 超高强度钢板基体和镀锌层的选择性氧化行为.通过控制炉区气氛露点抑制钢板中Mn 和Si 元素的选择性氧化,提升镀锌层与基体的黏附力.结果表明:经预氧化+在气氛露点被控制在-50℃的炉区内氧化的 2.5%Mn-0.2%Si 超高强度钢板镀锌层的黏附力最大.
Selective oxidation behavior of substrate and zinc coating of 2.5%Mn-0.2%Si ultra-high strength steel sheet subjected to pre-oxidation plus reduction and to pre-oxidation plus oxidation in furnace zone was investigated via scanning electron microscope,dual-beam focused ion beam microscope and glow spectrograph.The selective oxidation of Mn and Si elements in the sheet was suppressed by control of the dew point of atmosphere in furnace zone to enhance the adherence of the zinc coating to the substrate.The results indicated that the adherence of the zinc coating on 2.5%Mn-0.2%Si ultra-high strength steel sheet subjected to pre-oxidation plus oxidation in furnace zone where the dew point of atmosphere was controlled at-50℃was the largest.
年,卷(期):
2026, 48(5)
分类号:
TG132.3
机标分类号:
TG142
O643.36
TH112
在线出版日期:
2026年9月30日