厚规格F36船板钢铸坯心部异常贝氏体的形成机制
Formation Mechanism of Abnormal Bainite in Core of Heavy-Gauge F36 Ship Plate Steel Cast Slab
摘要
采用光学显微镜、场发射扫描电子显微镜及电子探针显微分析仪,研究了厚规格F36 船板钢铸坯心部异常贝氏体的形成机制.结果表明:从铸坯内弧表面到心部,冷却速率从19.67℃/s 降至0.63℃/s,二次枝晶间距从22.3 μm增至 121.7 μm;铸坯组织主要是铁素体和珠光体,心部出现大量异常贝氏体和严重的Mn 元素枝晶偏析,偏析区 Mn 质量分数高达3.6%,远高于铸坯初始Mn 含量;Mn 含量正常区域组织主要是铁素体和珠光体,而富Mn 区形成了贝氏体.采用JMatPro 软件计算的TTT曲线表明,铸坯心部富Mn 区TTT曲线右移,使铁素体和珠光体转变显著延迟,该区域温度正好在贝氏体转变区,从而形成了贝氏体.
Mechanism whereby the abnormal bainite formed in the core of heavy-gauge F36 ship plate steel cast slab was investigated by optical microscope,field emission scanning electron microscope and electron probe micro analyzer.The results showed that(a)from the inner arc surface to the core of the cast slab,the cooling rate decreased from 19.67 to 0.63℃/s,and the secondary dendrite arm spacing increased from 22.3 to 121.7 μm;(b)the microstructure of the slab was mainly composed of ferrite and pearlite,and a large amount of abnormal bainite and severe dendritic segregation of Mn appeared in the core,the mass fraction of Mn in the segregation region being as high as 3.6%which was much higher than the initial Mn content of the cast slab;and(c)the regions with normal Mn content consisted predominantly of ferrite and pearlite,whereas bainite formed in the Mn-enriched regions.From the time-temperature-transformation(TTT)curves calculated by JMatPro software it was indicated that the TTT curve of the Mn-enriched region in the core of the cast slab shifted to the right,which caused the transformation of ferrite and pearlite to be greatly retarded;the temperature in this region was just within the bainite transformation range,thus resulting in the formation of bainite.
年,卷(期):
2026, 48(5)
分类号:
TG142.1
机标分类号:
TG151.2
TG335.63
TB383
在线出版日期:
2026年9月30日
基金项目:
2021GK1210:湖南省科技成果重点推广计划,