军事知识服务平台
Mechanisms of miscible gas injection for ultra-low permeability carbonate reservoirs:A case study of the S reservoir in the H oilfield,Iraq
摘要 The S reservoir is a typical Middle Eastern carbonate formation characterized by a formation temper-ature of 89℃,salinity of 200,000 mg/L,and permeability below 1 mD.It exhibits low and continuously declining formation pressure and single-well productivity,making water flooding inefficient.Therefore,it is essential to evaluate the feasibility of gas injection to supplement reservoir energy and provide a theoretical basis for selecting suitable injection media and parameters for field development.To address these challenges,a high-temperature and high-pressure NMR online gas displacement and long-core flooding experimental system was established.Gas expansion,minimum miscibility pressure,and dy-namic core displacement experiments were conducted and integrated with numerical simulations to examine the effects of gas type,injection timing,and injection rate on microscopic displacement behavior,recovery efficiency,and flow characteristics in ultra-low-permeability carbonate reservoirs.The results indicate that,in such tight formations,macroscopic flow follows non-Darcy behavior with a distinct threshold pressure gradient,while microscopically,gas diffusion from larger pores into smaller throats promotes oil displacement.The coupling between molecular diffusion and the threshold pres-sure gradient jointly governs ultimate recovery efficiency,providing new insights into gas injection mechanisms in ultra-low-permeability carbonate reservoirs.Experimental findings further demonstrate that crude oil in the S reservoir exhibits a large saturation pressure difference and low viscosity.Gas injection enhances the elastic expansion capacity of crude oil by 13.68%-19.54%and reduces its viscosity by 8.08%-12.23%.Under the current formation pressure(34.45 MPa),CO2 and hydrocarbon gas achieve miscible flooding,whereas N2 remains immiscible.Miscible flooding improves small-pore oil utilization by approximately 20%,and considering both miscibility and displacement efficiency,hydrocarbon gas is recommended as the preferred injection medium.Compared with N2 immiscible flooding,hydrocarbon gas-under pulse or continuous injection—achieves more than 50%recovery.The optimal conditions for miscible flooding include an injection rate of 0.0811-0.0908 m/d,injection pressure above the MMP,and an injection-production ratio of 1:1,resulting in a maximum recovery efficiency of up to 76%.This study establishes both a theoretical and experimental foundation for optimizing gas injection in ultra-low-permeability carbonate reservoirs and demonstrates practical relevance by improving gas-oil mobility control,reducing emulsion stability,and enhancing separation efficiency during surface fluid processing.
年,卷(期): 2026, 23(6)
机标分类号: TD712.7 R445.2 TH138152+1
在线出版日期: 2026年8月12日