军事知识服务平台
含油薄纹层页岩储层原始状态下孔隙度表征
In-situ porosity characterization of oil-bearing thinly laminated shale reservoirs:
摘要 陆相页岩储层中普遍发育毫米—微米级薄—极薄纹层,非均质性强且含油,导致孔隙度精确检测难度大,而孔隙度作为储层评价的核心参数,直接影响甜点预测、储量计算与开发方案制定.针对单一薄纹层含油页岩,本文制备薄板状样品,对比了"洗油—氦气法"与"饱和—核磁法"的适用性,并提出"氦气—核磁联测法".实验表明,强化洗油 15 d 后氦气测试总孔隙度仅为2.00%~4.13%;经负压浸泡、自发渗吸和加压饱和累计9.5 d 后,核磁测试总孔隙度仅为1.56%~2.23%.两种常规方法均不同程度低估了真实孔隙度."氦气—核磁联测法"在原始状态(不洗油、不饱和)下,将含油薄纹层陆相页岩有效孔隙空间划分为滞留孔隙和连通孔隙,分别由二维核磁法和充分平衡的氦气法进行测试,获得总联测孔隙度为 2.57%~4.77%.该方法全流程不接触外界流体,在样品的原始状态下实现了无损精细表征,所获孔隙度特征更贴近地质实际,为优质储层与甜点段精细刻画、储量计算及开发方案制定提供了更合理的物性参数依据.
Abstract:
Continental shale reservoirs widely develop millimeter-to-micrometer and thin to ultra-thin laminae,charac-terized by strong heterogeneity and oil-bearing properties,which pose great challenges to accurate porosity quanti-fication.As a core parameter for reservoir evaluation,porosity directly governs sweet-spot identification,reserve calculation,and development planning.In this study,thin-plate specimens were prepared for single oil-bearing thin-lamina shale.The applicability of the oil-washing helium porosimetry and saturated NMR method was compared,and a novel helium-NMR joint measurement method was accordingly proposed.Experimental results show that the total porosity measured via helium porosimetry after intensive 15-day oil washing only varies from 2.00%to 4.13%.After a cumulative 9.5 days of treatment including negative-pressure soaking,spontaneous imbibition,and pressurized saturation,the total porosity obtained by NMR testing reaches merely 1.56%-2.23%.Both conventional methods underestimate the true porosity to varying degrees.Under the original in-situ geological conditions without oil washing or external fluid saturation,the helium-NMR joint measurement method divides the effective pore space of continental oil-bearing thinly laminated shale into retained pores and connected pores,which are quantitatively characterized by two-dimensional NMR and fully equilibrated helium porosimetry testing.The total porosity acquired by this joint method ranges from 2.57%to 4.77%.The entire testing workflow avoids contact with external fluids and enables non-destructive,high-precision characterization of samples under their original conditions.The porosity data derived from this method are more consistent with actual geological condi-tions and can provide reliable petrophysical parameters for fine characterization of high-quality reservoirs and sweet-spot intervals,reserve estimation,and development planning.
刊 名 石油实验地质 ISTICPKU
年,卷(期): 2026, 48(5)
分类号: TE122.2
机标分类号: P631.2 TE122.2 TE3
在线出版日期: 2026年10月16日
基金项目: 42302177:国家自然科学基金35450003-23-ZC0607-0020:中国石化勘探分公司科技项目,