军事知识服务平台
热锻态5CrNiMoVNb钢等温球化退火工艺优化及组织性能分析
Optimization of Isothermal Spheroidizing Annealing Process and Analysis of Microstructure and Properties for Hot-Forged 5CrNiMoVNb Steel
摘要 以新型热作模具钢5CrNiMoVNb为研究对象,系统研究了等温球化退火工艺对其热锻态组织与性能的影响规律.热锻态组织主要由板条贝氏体、马氏体及少量碳化物组成,硬度为528HV.研究结果表明,奥氏体化温度与等温温度对球化组织及硬度具有决定性作用.当奥氏体化温度为790℃、等温温度为690℃时,可获得球化率高、碳化物均匀分布的理想球状珠光体组织.过高的奥氏体化温度(810℃)会导致碳化物粗化与球化率下降,而过低的等温温度(630℃)则抑制球化过程,形成片状珠光体.表面硬度分析结果表明,珠光体组织球化率的提升直接导致材料硬度显著降低.最终确定了本研究条件下较优的等温球化退火工艺窗口,该工艺下获得的低硬度、高球化率组织预期有利于后续的切削加工与最终热处理.
Abstract:
This study systematically investigated the effect of isothermal spheroidizing annealing on the microstructure and properties of a novel hot-work die steel 5CrNiMoVNb.The as-forged microstructure primarily consists of lath bainite,mar-tensite,and a small amount of carbides,exhibiting a hardness of 528 HV.The results demonstrated that the austenitizing temperature and isothermal temperature play a decisive role in determining the spheroidized microstructure and hardness.An ideal spheroidized pearlite structure with a high spheroidization rate and uniformly distributed carbides was achieved at an austenitizing temperature of 790℃and an isothermal temperature of 690℃.Excessively high austenitizing temperature(810℃)led to carbide coarsening and a decreased spheroidization rate,while an excessively low isothermal temperature(630℃)inhibited the spheroidization process,resulting in the formation of lamellar pearlite.Surface hardness analysis confirmed that the increase in the spheroidization rate of the pearlite structure directly resulted in a significant reduction in material hardness.The optimal process window for isothermal spheroidizing annealing under the conditions of this study has been determined.The low-hardness,high-spheroidization-rate microstructure obtained under this process is expected to be beneficial for subsequent machining and final heat treatment.
刊 名 特殊钢
年,卷(期): 2026, 47(5)
分类号: TG156.2
机标分类号: TG166.3 TG335.5 TG456.7
在线出版日期: 2026年9月21日
基金项目: 23KJD430012:江苏省高等学校自然科学面上项目2023:宿迁学院优秀毕业论文培育项目K202307:宿迁市科技计划项目2025KCGG07:宿迁学院教学改革研究专项类课题,