燃料电池气体扩散层工艺优化及性能研究
Process optimization and performance study of gas diffusion layer for fuel cells
摘要
研究了燃料电池气体扩散层的碳纸处理与微孔层制备工艺.对碳纸采用丙酮进行超声清洗,除去杂质,然后采用聚四氟乙烯浸渍,经煅烧,实现疏水化,最后以高结构导电炭黑(Vulcan XC-72)制备微孔层并调控附着量.丙酮处理可降低杂质,改善孔隙.聚四氟乙烯可以增强疏水性.微孔层附着量为 1.0 mg/cm2 时,高电流密度下电压输出更高,性能更稳定.
The carbon paper treatment and microporous layer preparation process of fuel cell gas diffusion layers were investigated.The carbon paper was ultrasonically cleaned with acetone to remove impurities,then impregnated with polytetrafluoroethylene and calcined to achieve hydrophobization.Finally,a microporous layer was prepared using high-structure conductive carbon black(Vulcan XC-72)with its loading amount regulated.Acetone treatment can reduce impurities and improve the pore structure.Polytetrafluoroethylene can enhance hydrophobicity.When the loading amount of the microporous layer is 1.0 mg/cm²,the voltage output is higher and the performance is more stable under high current density.
年,卷(期):
2026, 63(5)
分类号:
TM912.9
机标分类号:
TQ333.93
P5
TM911.4
在线出版日期:
2026年9月30日