军事知识服务平台
纳米SiO2改性处理对BF/PI复合材料界面及力学性能的影响
Effects of Nano-SiO2 modification on the interface and mechanical properties of BF/PI composites
摘要 为改善玄武岩纤维(BF)与聚酰亚胺树脂(PI)之间的界面结合性能,采用纳米二氧化硅(Nano-SiO2)和硅烷偶联剂 KH550 对 BF 进行协同改性.综合利用扫描电镜、红外光谱、水接触角以及宏观力学试验,表征了改性前后BF 的表面特征,并探究了改性对BF/PI 复合材料力学性能的增强机制.结果表明:Nano-SiO2 成功接枝在纤维表面,显著增大了 BF 的比表面积并改善了 BF 的浸润性,从而在纤维与树脂间建立致密的界面结合网络.随着界面结合的改善,复合材料的拉伸与弯曲性能均实现提升;其中,经3%质量分数Nano-SiO2 改性的复合材料力学性能达到最佳,弯曲强度与拉伸强度分别增加到 255.5 MPa 和 237.2 MPa,相较于未改性复合材料分别提升了 41%和 19.3%.研究结果可为优化玄武岩纤维复合材料界面性能提供实验依据与理论参考.
Abstract:
The basalt fiber(BF)is an environmentally friendly high-performance inorganic fiber.With its excellent mechanical properties,outstanding durability and chemical stability,it is widely used as a reinforcement for high-performance resin matrix composites in many industrial fields.Polyimide(PI)resin has extremely high thermal stability and excellent comprehensive mechanical properties,and its combination with BF has great application potential.However,the untreated BF surface is extremely smooth and chemically inert,and the number of surface active functional groups is small.This characteristic leads to poor interfacial wettability and extremely weak interfacial adhesion when it is compounded with PI resin.To improve the interfacial bonding effect between BF and PI resin,it is necessary to carry out surface modification treatment.However,both acid-base etching and laser modification will cause damage to the fiber.The coupling agent modification will not damage the fiber,but the single silane coupling agent modification can only introduce chemical groups to the fiber surface. To improve the surface properties of the fiber from the dual dimensions of physical morphology and chemical bonding without damaging the strength of the fiber body,Nano-SiO2 and silane coupling agent KH550 were used to synergistically modify BF in this paper.In order to explore the concentration of nanoparticles that play the best interface enhancement effect,this paper sets up six mass fraction gradients of Nano-SiO2 modified basalt fiber experimental groups from 0%to 5%,and uses the hot molding process to prepare the sheet with PI resin.To characterize the effect of fiber modification,the chemical composition of the fiber surface was tested by Fourier transform infrared spectroscopy.The microstructure of the fiber surface before and after modification and the fracture of the composites were observed by scanning electron microscopy.At the same time,the change of fiber surface wettability was evaluated by water contact angle test.In terms of mechanical properties verification,the modification effect was verified by three-point bending and tensile tests,and the failure mechanism of the composites was explored. The experimental results showed that Nano-SiO2 was successfully introduced into the modified BF surface,and its wettability to PI resin was improved.In terms of mechanical properties,the mechanical properties of the composites modified by 3%mass fraction of Nano-silica reached the best.Among them,the three-point bending strength of the composite material increased from 181.1 MPa to 255.5 MPa,an increase of 41%.The tensile strength of the composites increased from 198.9 MPa to 237.2 MPa,and the elongation at break increased from 3.5%to 4.8%.The mechanism analysis showed that the interfacial properties of the composites modified by Nano-SiO2 and silane coupling agent KH550 were enhanced,and the strength and toughness of BF/PI composites were improved.
刊 名 现代纺织技术 ISTICPKU
年,卷(期): 2026, 34(10)
分类号: TS107.2
机标分类号: TB332 TQ325.3 O646.23
在线出版日期: 2026年10月27日
基金项目: 52375459:国家自然科学基金,