Preparation and performance of dual-scale cellulose/halloysite composite aerogels
摘要
为分析多尺度纤维素原料对气凝胶的隔热性能与力学性能的影响,通过稀释冻干预处理与 2,2,6,6-四甲基哌啶氧化物(TEMPO)介导氧化分别制备了亚微米尺度纤维素(SC)和微米尺度纤维素(MC),并以此构建了不同比例的多级骨架基体.引入氨基改性埃洛石纳米管(A-HNTs)作为增强相,结合聚酰胺环氧氯丙烷树脂(PAE)交联剂构建共价网络,经冷冻干燥制备了一系列轻质复合气凝胶,系统研究了 SC/MC 比例与A-HNTs 添加量对气凝胶结构与性能的影响.结果表明:随着 A-HNTs 添加量的增加,复合气凝胶的压缩应力逐渐提高,导热系数呈先降后升的趋势.当纤维素 SC 与 MC 比例为 3∶1 且 A-HNTs 添加质量分数为 50%时,所得复合气凝胶(C31-H50)综合性能最优,导热系数最低达 28.24 mW/(m·K),密度为 13.03 mg/cm3.A-HNTs 的引入与多尺度纤维素骨架之间呈现协同增强效应,优化了气凝胶孔壁结构与孔隙分布,从而改善了隔热性能.本研究可为多尺度分级微孔—介孔结构纤维素复合气凝胶的制备与性能优化提供实验依据.
High-efficiency thermal insulation materials have growing demand in energy conservation,building envelopes and special protection fields.Aerogels have become a research focus in lightweight high-efficiency insulation systems due to their ultra-low density and superb thermal insulation performance provided by their nanoporous structure.Compared with traditional inorganic or polymer-based aerogels,which generally have issues such as high brittleness,complex processing and high cost,cellulose-based aerogels not only have abundant sources and are biodegradable,but their surface is rich in hydroxyl groups,making chemical modification easy and demonstrating better sustainability and functional designability.The scale of cellulose has a significant impact on the thermal insulation and mechanical properties of aerogels,so it is necessary to find a simple and feasible method to prepare aerogels that are lightweight,have low thermal conductivity,and possess good mechanical properties.
A multi-scale synergistic reinforcement design strategy was proposed,and submicron-scale cellulose(SC)and micron-scale cellulose(MC)were prepared through TEMPO(2,2,6,6-tetramethylpiperidine-1-oxyl)selective oxidation and dilute freeze-drying pre-treatment,respectively,with cellulose dispersions of different mass fractions configurated as a hierarchical porous skeleton.Amino-silane-modified halloysite nanotubes(A-HNTs)were introduced as a nanoscale reinforcing phase and polyamide epichlorohydrin resin(PAE)was used as a chemical crosslinker.Through uniform dispersion,rapid freezing and freeze-drying,a series of lightweight cellulose composite aerogels were successfully prepared,and the effects of cellulose scale ratio(SC/MC)and A-HNTs content on the structure and properties of the composite aerogels were systematically investigated.
The results show that when the A-HNTs content was in the range of 10%to 50%,A-HNTs could be evenly dispersed in the cellulose network,effectively thickening the pore walls and optimizing the pore structure.The compressive stress of the composite aerogels increased with increasing A-HNTs content,and the thermal conductivity showed a non-monotonic trend of first decreasing and then increasing,reaching the optimum at 50%addition.When the SC∶MC ratio was 3∶1 and the A-HNTs content was 50 wt%,the prepared composite aerogel(C31-H50)exhibited the best overall performance.Its density was 13.031 mg·cm-3,porosity reached 99.09%,thermal conductivity was as low as 28.24 mW/(m·K),and delayed elastic recovery rate reached 88.7%.The introduction of A-HNTs and the multi-scale cellulose framework formed a synergistic reinforcement effect,optimizing the aerogel pore wall structure and pore distribution,and achieving a lower thermal conductivity and good thermal stability while ensuring mechanical performance.