军事知识服务平台
冗余自由度管片拼装机末端定位误差传播建模与补偿
Error propagation modeling and compensation for end-effector positioning of a redundant-DOF segment erector
摘要 针对传统六自由度管片拼装机末端定位精度受大回转环执行误差主导的问题,提出一种基于冗余自由度的逆运动学误差补偿方法.首先,建立含9项误差源的正运动学模型,偏差控制在10-5 mm;其次,引入误差旋量与雅可比矩阵构建线性误差传播模型,结合误差椭球可视化分析,揭示传统拼装机对大回转误差有着极高的敏感度;最后,以横移油缸为冗余自由度,提出针对大回转环的补偿策略:初次定位采用传统逆运动学求解位姿,精定位阶段依据大回转环实测角度重解横移油缸行程,实现大回转误差与末端位置误差的运动学解耦.理论推导与数值验证表明,新模式下大回转环误差对末端位置的敏感度趋近于0,误差椭球半轴由15.91 mm显著缩减至0.98 mm,验证了该方法的有效性.
Abstract:
To address the problem that the end-effector positioning accuracy of conventional six-degree-of-free-dom(6-DOF)segment erectors is dominated by execution errors of the large slewing ring,an inverse-kinematics error compensation method based on a redundant degree of freedom is proposed.First,a forward kinematics mod-el incorporating nine error sources was established,with the deviation controlled within 10-5 mm.Second,a linear error propagation model was constructed by introducing error twists and the Jacobian matrix.Error-ellipsoid visu-alization revealed the high sensitivity of the conventional segment erector to the large slewing ring error.Subse-quently,the transverse hydraulic cylinder was introduced as a redundant degree of freedom,and a compensation strategy for the large slewing ring was developed.During the initial positioning stage,the pose was determined us-ing conventional inverse kinematics.During the fine-positioning stage,the stroke of the transverse hydraulic cylin-der was recalculated according to the measured angle of the large slewing ring,thereby achieving kinematic de-coupling between the large slewing ring error and the end-effector position error.Theoretical derivation and nu-merical validation show that,under the proposed compensation mode,the sensitivity of the end-effector position to the large slewing ring error approaches zero,while the major semi-axis of the error ellipsoid is significantly re-duced from 15.91 mm to 0.98 mm,demonstrating the effectiveness of the proposed method.
刊 名 现代隧道技术 ISTICPKU
年,卷(期): 2026, 63(5)
分类号: U455.3
机标分类号: V241.611 TP393 TP242.2
在线出版日期: 2026年11月4日
基金项目: 23DZ1202900:上海市科委社会发展科技攻关项目,