Structural response of frame tunnels in curved sections under vehicle collision loads
摘要
受空间曲率线形及复杂行车环境影响,曲线隧道具有较高的车辆冲击事故风险.为探究车辆碰撞荷载下曲线段框架隧道结构响应规律,采用有限元数值模拟技术研究曲线段装配式框架隧道结构在典型车辆荷载工况(轿车、SUV、货车、油罐车)及宽域冲击速度(60~120 km/h)范围下的动态力学响应特征,并与现浇混凝土框架隧道结构进行对比分析.结果表明:冲击速度与车辆质量是影响隧道结构响应的主要因素,冲击速度为120 km/h时,轿车冲击力峰值约为60 km/h工况的5倍;冲击速度为80 km/h时,货车和油罐车的最大凹陷位移分别为轿车的3.3倍和3.5倍.在研究工况范围内,与装配式隧道相比,现浇隧道监视点位移在轿车和SUV冲击时较小,在货车和油罐车冲击时较大;装配式隧道的损伤主要集中于受撞预制环,表现出较明显的局部化特征.
Owing to the spatial curvature of the alignment and complex driving conditions,curved tunnels are sub-ject to a relatively high risk of vehicle collisions.To investigate the structural response of frame tunnels in curved sections under vehicle collision loads,finite element simulations were conducted to analyze the dynamic mechani-cal responses of prefabricated frame tunnels subjected to four typical vehicle types,namely cars,SUVs,trucks,and tankers,at impact velocities ranging from 60 to 120 km/h.The results were compared with those of cast-in-place concrete frame tunnels.The results show that impact velocity and vehicle mass are the main factors affect-ing the structural response of the tunnel.For the car,the peak impact force at 120 km/h is approximately five times that at 60 km/h.At an impact velocity of 80 km/h,the maximum indentation displacements caused by the truck and tanker are approximately 3.3 and 3.5 times that caused by the car,respectively.Within the investigated range of conditions,the cast-in-place tunnel exhibits smaller overall displacement under impacts from the car and SUV,whereas the prefabricated tunnel exhibits smaller overall displacement under impacts from the truck and tanker.Compared with the cast-in-place tunnel,damage in the prefabricated tunnel is mainly concentrated within the im-pacted precast ring,showing a more pronounced localized damage pattern.