军事知识服务平台
纳米SiO2-CeO2核壳结构粉体的工业化制备及抛光研究
Study on Industrial Preparation and Polishing Performance of Nano-SiO2-CeO2 Core-shell Nanocomposite Powder
摘要 在常压水溶液环境中可控制备出均匀包覆的SiO2-CeO2核壳结构复合粉体,对比正硅酸乙酯与硝酸铈、SiO2溶胶与氯化铈等不同原料的制备过程及粉体对硅片的抛光效果.利用XRD、SEM、TEM等检测手段对粉体进行表征,用UNIPOL-1200S和白光干涉仪测试其抛光效果.结果表明,正硅酸乙酯水解制备的SiO2微球平均粒径为390 nm,SiO2-CeO2复合微球的平均粒径为410 nm,包覆在氧化硅表面的氧化铈颗粒的粒径在10 nm左右,抛光后硅片面粗糙度为0.43 nm,SiO2溶胶中SiO2微球平均粒径为94 nm,SiO2-CeO2复合物微球的平均粒径为100 nm左右,包覆在氧化硅表面的氧化铈颗粒层的厚度在3 nm左右,抛光后硅片面粗糙度为0.273 nm,面粗糙度Sa 降低了 36%.
Abstract:
SiO2-CeO2 core-shell composite powder with uniform coating was prepared controllable in atmospheric aqueous solution environment.The preparation process of ethyl orthosilicate,cerium nitrate,SiO2 sol and cerium chloride as different raw materials and the polishing effect of the powder on the silicon wafer were compared.The powder materials were character-ized by XRD,SEM and TEM,and its polishing effect was tested by UNIPOL-1200S and white light interferometer.The results show that the average particle size of SiO2 microspheres prepared by ethyl orthosilicate hydrolysis is 390 nm,the average parti-cle size of SiO2-CeO2 composite microspheres is 410 nm,the particle size of cerium oxide particles coated on the surface of sil-icon oxide is about 10 nm,and the surface roughness of the polished silicon wafer is 0.43 nm.The average particle size of SiO2 microspheres in SiO2 sol is 94 nm,the average particle size of SiO2-CeO2 composite microspheres is about 100 nm,and the thickness of the cerium oxide particle layer coated on the surface of silicon oxide is about 3 nm.After polishing,the sur-face roughness of the silicon wafer is 0.273 nm,and the surface roughness Sa is reduced by 36%.
刊 名 稀土 ISTICPKU
年,卷(期): 2026, 47(4)
分类号: TB383
机标分类号: O633.223 TU528 TE9906
在线出版日期: 2026年9月17日