Enhancing thrust density of slotless tubular permanent magnet synchronous linear motors via analytical method
摘要
[目的]为了提高无槽圆筒型永磁同步直线电机(TPMLSM)推力密度,并解决传统有限元法在优化设计中计算耗时长、效率低下的问题,该文提出了一种基于解析模型的高效优化设计方法.[方法]首先,基于麦克斯韦电磁场方程,在圆柱坐标系下建立电机的数学解析模型,推导标量磁位及气隙磁密的解析表达式,并通过三维有限元法验证解析模型的准确性;随后,提出一种将解析模型与自适应混合遗传算法相结合的协同优化策略,以推力密度最大化为优化目标,以电机几何参数为变量,在满足体积约束与工艺经济性的条件下进行全局寻优.[结果]实验验证表明,解析模型计算结果与有限元仿真高度吻合,且单次计算时间由数小时缩短至15 min;经优化后,电机推力密度显著增加,且优化过程总耗时仅为1.5 h,大幅缩短了设计周期.[结论]该文验证了基于解析法的无槽TPMLSM推力密度提升方法的有效性.该方法通过解析模型替代耗时的有限元仿真进行迭代计算,不仅保证了计算精度,更极大地提高了优化效率,为同类电机的高性能设计提供了可靠的理论依据与工程应用参考.
[Objective]To improve the thrust density of a slotless tubular permanent magnet linear synchronous motor(TPMLSM)and address the issues of long computation time and low efficiency in traditional finite element method-based optimization design,this study proposes an efficient optimization design method based on an analytical model.[Method]First,based on Maxwell's electromagnetic field equations,a mathematical analytical model of the motor is established in the cylindrical coordinate system,and the analytical expressions for the scalar magnetic potential and air-gap flux density are derived.The accuracy of the analytical model is verified through 3D finite element analysis.Subsequently,a collaborative optimization strategy combining the analytical model with an adaptive hybrid genetic algorithm is proposed.With the maximization of thrust density as the optimization objective and motor geometric parameters as variables,global optimization is carried out under volume constraints and process economy conditions.[Result]Experimental validation shows that the analytical model results are in good agreement with finite element simulations,and the single computation time is reduced from several hours to 15 minutes.After optimization,the motor thrust density is significantly increased,and the total optimization process takes only 1.5 hours,greatly shortening the design cycle.[Conclusion]This study verifies the effectiveness of the analytical-method-based approach for improving the thrust density of slotless TPMLSM.By replacing time-consuming finite element method simulations with the analytical model for iterative computation,the proposed method not only ensures computational accuracy but also greatly improves optimization efficiency,providing a reliable theoretical basis and engineering application reference for the high-performance design of similar motors.