军事知识服务平台
车桥耦合作用下桥墩冲刷的三维CFD-DEM模拟
Three dimensional CFD-DEM simulation of pier scour under vehicle-bridge interaction
摘要 [目的]为了进一步定量评估交通诱导的桥梁结构动力响应对桥墩周围局部流场及冲刷演化过程的影响,针对现有研究通常将车辆荷载建模为静态或准静态,而忽略了交通引起的桥梁结构振动对冲刷演化过程动态影响的问题,本研究旨在建立高精度的仿真框架,定量分析车桥耦合作用对不同形状桥墩局部流场及冲刷坑深度的影响机理.[方法]提出并建立了一个基于计算流体动力学-离散元法(CFD-DEM)的三维冲刷损伤仿真评估框架.采用欧拉-拉格朗日耦合(CEL)框架构建水-泥沙模型并引入三维车桥耦合系统.利用纽马克-β法(Newmark-beta method)求解车桥耦合系统的动力学方程,获取桥墩在横向与竖向的时变振动加速度.将该时变振动作为流固界面的动态边界条件引入CFD-DEM数值模型中,在每一时间步实时改变桥墩与流体、泥沙交界面的运动学状态,从而实现对桥墩周围局部流场及泥沙运动的精细化模拟分析.研究分别针对圆形、方形和八边形3种典型形状的桥墩,对比了在无车桥耦合作用与有车桥耦合作用下的冲刷发展特性.[结果]模拟数据表明:1)车桥耦合作用对桥墩周围湍流正应力的影响较小(平均变化幅度约为0.1%),但会显著增大泥沙正应力(平均变化幅度约为17.1%),从而加速了泥沙的剥离与冲刷坑的扩展发展;2)相比于无车桥耦合工况,有车桥耦合作用时冲刷坑形成速度更快、深度更深且前后分布范围更长;3)在3种形状桥墩中,八边形桥墩受车桥耦合效应的影响最为显著,其平衡冲刷深度增加了 0.44 m;4)方形桥墩在3种形状中表现出最大的绝对泥沙正应力和冲刷深度,而八边形桥墩的冲刷深度相对较小,这一趋势与不同形状对应的正应力分布规律保持一致.[结论]该文通过构建的CFD-DEM与车桥耦合仿真框架,从细观层面揭示了桥梁动力响应强化桥墩冲刷的物理机理.该方法证明了车桥耦合作用会通过改变桥墩交界面的运动状态并显著提升泥沙正应力来加剧冲刷过程,尤其对于八边形等特定几何形状的桥墩,这种动态效应更为突出.该研究成果说明在进行桥梁局部冲刷风险预测时,考虑交通动荷载引起的结构振动至关重要,为复杂环境下桥梁的抗冲刷设计与运营期安全评估提供了重要的数值参考依据.
Abstract:
[Objective]In order to quantitatively evaluate the impact of traffic-induced dynamic responses of bridge structures on the local flow field and scour evolution around piers,this study addresses the limitation of existing research that typically models vehicle loads as static or quasi-static while ignoring dynamic vibrations.A high-precision simulation framework was established to quantitatively analyze the impact mechanism of vehicle-bridge interaction on the local flow field and scour depth for piers of different shapes.[Method]A three-dimensional erosion simulation framework based on the Computational Fluid Dynamics-Discrete Element Method(CFD-DEM)was proposed.The Coupled Eulerian-Lagrangian(CEL)framework was utilized to construct the water-sediment model,and a three-dimensional vehicle-bridge interaction system was introduced.The Newmark-beta method was employed to solve the dynamic equations of the vehicle-bridge interaction system to obtain the time-varying vibration accelerations of the pier in both transverse and vertical directions.These accelerations were introduced into the CFD-DEM model as dynamic boundary conditions at the fluid-solid interface.The kinematic states of the interfaces between the pier,fluid,and sediment were updated in real-time at each time step to achieve a refined simulation of the local flow field and sediment movement.The scour characteristics of circular,square,and octagonal piers were compared under conditions with and without vehicle-bridge interaction.[Result]The simulation results showed that:1)The vehicle-bridge interaction effect had a negligible impact on the turbulent normal stress around the pier(average variation of~0.1%)but significantly increased the sediment normal stress(average variation of~17.1%),thereby accelerating sediment stripping and scour pit expansion;2)Compared to conditions without vehicle-bridge interaction,the scour pits with vehicle-bridge interaction formed faster,reached greater depths,and exhibited a longer longitudinal distribution;3)Among the three shapes,the octagonal pier was most significantly affected by vehicle-bridge interaction,with its equilibrium scour depth increasing by 0.44 m;4)The square pier exhibited the largest absolute sediment normal stress and scour depth,while the octagonal pier had a relatively smaller scour depth,which was consistent with the normal stress distribution of the respective shapes.[Conclusion]This study reveals the physical mechanism by which bridge dynamic responses strengthen pier scour at the meso-scale.The results demonstrate that vehicle-bridge interaction intensifies the scouring process by altering the motion state of the pier interface and significantly increasing sediment normal stress,particularly for specific geometric shapes like octagons.This research highlights the importance of considering traffic-induced vibrations in bridge scour risk prediction and provides a valuable numerical reference for anti-scour design and safety assessment in complex environments.
年,卷(期): 2026, 48(4)
分类号: TU997
机标分类号: U441.3 TU311.3 U211.6
在线出版日期: 2026年9月22日
基金项目: 2023JJ30044:湖南省自然科学基金项目,