军事知识服务平台
基于工作锚应变特性的锚下有效预应力长期监测方法
Long-term monitoring of anchorage effective prestress based on the strain characteristics of the working anchor
摘要 [目的]针对预应力结构服役期锚下有效预应力难以实现长期、连续监测的问题,设计一种基于工作锚应变特性的锚下有效预应力长期监测方法.[方法]基于M15-6型锚具建立工作锚三维精细化有限元模型,分别模拟张拉阶段与服役阶段2种典型受力工况,分析工作锚应变特性并确定适宜监测截面;通过提取2种工况下轴向中部断面的应变与轴向力数据,采用线性拟合求得数值标定系数,并引入转换系数建立不同受力阶段间的应变响应关系.依托工程现场开展应变监测试验,在工作锚轴向中部断面环向对称布置4片电阻应变片,结合张拉阶段实测数据完成现场标定,进而建立基于工作锚应变反演服役期锚下有效预应力的计算方法,并通过两根标准试验梁开展对比试验对方法精度进行验证.[结果]试验结果表明锚下有效预应力均呈前期衰减较快、后期趋于平缓的时变规律,其中SYL-1平均误差为1.50%、最大误差为2.98%,SYL-2平均误差为2.31%、最大误差为3.68%,各阶段误差均控制在5%以内.[结论]该方法能够实现服役期锚下有效预应力的长期监测,具有良好的精度与实用性,可为预应力结构服役期安全状态评估提供可靠技术支撑.
Abstract:
[Objective]To address the difficulty of achieving long-term and continuous monitoring of anchorage effective prestress in prestressed structures during service,a long-term monitoring method based on the strain characteristics of the working anchor is proposed.[Method]A refined three-dimensional finite element model of an M15-6 working anchor is established to simulate two typical loading conditions,namely the tensioning stage and the service stage.The strain characteristics of the working anchor are analyzed,and an appropriate monitoring section is determined.By extracting the strain and axial force data at the axial middle section under the two loading conditions,numerical calibration coefficients are obtained through linear fitting,and a conversion coefficient is introduced to establish the strain response relationship between different loading stages.Based on an on-site strain monitoring test,four resistance strain gauges are symmetrically arranged along the circumferential direction of the axial middle section of the working anchor.Field calibration is completed using the measured data from the tensioning stage,and a calculation method for inverting the anchorage effective prestress during service based on the measured strain of the working anchor is then established.In addition,comparative tests are conducted on two standard test beams to verify the accuracy of the proposed method.[Result]The results show that the anchorage effective prestress exhibits a time-dependent evolution characterized by a relatively rapid decrease in the early stage and a gradual stabilization in the later stage.For SYL-1,the average error and maximum error are 1.50%and 2.98%,respectively,while for SYL-2,they are 2.31%and 3.68%,respectively.All errors at each stage are controlled within 5%.[Conclusion]The proposed method enables long-term monitoring of anchorage effective prestress during service,with good accuracy and practical applicability,and can provide reliable technical support for the safety assessment of prestressed structures in service.
年,卷(期): 2026, 48(4)
分类号: TU378.2
机标分类号: U45 TU93 TU378
在线出版日期: 2026年9月22日
基金项目: 22C0071:湖南省教育厅一般项目,