自蔓延高温合成法制备活性炭/石墨烯复合材料用于高性能锂离子电容器
Self-propagating high-temperature synthesis of activated carbon/graphene composites for high-performance lithium-ion capacitors
摘要
锂离子电容器作为一类混合型储能器件,旨在兼具锂离子电池的高能量密度和超级电容器的高功率密度.然而,其性能往往受限于传统活性炭正极较低的比电容和电导率.本研究以镁粉和柠檬酸镁为前驱体,在 CO2 气氛下通过自蔓延高温合成方法制备了活性炭/石墨烯复合材料.所得复合材料命名为 MCG,其中 M代表镁热还原,CG 代表活性炭/石墨烯复合材料.小尺寸二维石墨烯片层附着于活性炭表面,抑制了石墨烯的重新堆叠,并形成连续的导电网络.最优的 MCG 样品具有较高的比表面积(1173.5 m2 g-1)和丰富的介孔结构.作为正极材料,其在 0.05 A g-1 电流密度下的比容量为77.2 mAh g-1,并表现出优异的循环稳定性,经过 10 000次循环后容量保持率达 99.9%.以MCG 为正极、软碳为负极组装的锂离子电容器实现了 127.3 Wh kg-1 的高能量密度,经过 5000次循环后仍保持84.2%的容量,展现出其在先进储能领域的应用潜力.
Lithium-ion capacitors(LICs)are hybrid energy storage devices designed to bridge the gap between the high energy dens-ity of lithium-ion batteries and the high power density of supercapacitors.However,their per-formance is often limited by the low specific capacitance and conductivity of conventional activated carbon cathodes.We report the pre-paration of an activated carbon/graphene com-posite by a self-propagating high-temperature synthesis method in a CO2 atmosphere,using magnesium powder and magnesi-um citrate as the precursors.The resulting composite is designated as MCG,where M denotes magnesiothermic reduction and CG denotes the activated carbon/graphene composite.Small two-dimensional graphene sheets are attached to the activated car-bon surface,suppressing graphene restacking and forming a continuous conductive network.The best MCG produced has a high specific surface area(1173.5 m2 g-1)and a rich mesoporous structure.As a cathode material,it has a specific capacity of 77.2 mAh g-1 at a current density of 0.05 A g-1 and exceptional cycling stability,with 99.9%capacity retention after 10 000 cycles.A full LIC assembled with an MCG cathode and soft carbon anode achieved a high energy density of 127.3 Wh kg-1 and retained 84.2%of its capacity after 5000 cycles,highlighting its potential for advanced energy storage applications.
年,卷(期):
2026, 41(5)
分类号:
TQ127.1+1
机标分类号:
X793
TB332
TG139.7
在线出版日期:
2026年11月9日