Graphene-encased hard carbon as a high-performance anode for sodium-ion batteries
摘要
硬碳(HC)因具有约 0.1 V(vs.Na+/Na)的低工作电位、成本效益高和资源丰富等优势,已成为钠离子电池(SIB)负极材料的有力候选.然而,当前研究多集中于通过孔隙工程提升平台容量,而对 HC负极中电子传输动力学的关注相对不足.为此,本研究采用等离子体增强化学气相沉积(PECVD)技术,在棉柔巾衍生硬碳(CTHC)表面均匀生长垂直石墨烯(VG)阵列,旨在系统改善其电子导电性与离子扩散能力.VG 结构提供了更丰富且缩短的电子传导路径,显著优化了电荷转移动力学.所得孔分级 CTHC@VG 负极展现出优异的储钠性能:可逆容量达389.7 mAh g-1,在 800 mA g-1 高电流密度下仍保持 187.6 mAh g-1,首次库仑效率高达 92.17%.进一步以 Na3V2(PO4)3(NVP)为正极组装全电池,CTHC@VG||NVP 体系在功率密度为 1380 W kg-1 时,能量密度可达 145 Wh kg-1.本研究证实,垂直石墨烯的引入为开发高性能、低成本且可持续的钠离子电池负极材料提供了有效策略.
Hard carbon(HC)has emerged as the promising anode material for commercial sodium-ion batteries because of its low operating plateau(~0.1 V vs.Na+/Na),cost-effectiveness,and the abundance of its precurs-ors While current research mainly focuses on pore engineering to optimize the plateau capacity,electron transport kinetics in the anodes remain largely overlooked.We address this critical aspect by uniformly grafting graphene(G)arrays onto cotton tissue-derived hard carbon(CTHC)by plasma-en-hanced chemical vapor deposition.Benefiting from the more numerous and shorter electron transport channels provided by G,the electronic conductiv-ity and ion transport capability of CTHC@G are significantly improved.The resulting CTHC@G anode has a superior sodium-storage capacity of 389.7 mAh g-1,retains a capacity of 187.6 mAh g-1 at a high current dens-ity of 800 mA g-1,and achieves an initial Coulombic efficiency of 92.17%.Furthermore,when configured in a full cell with a Na3V2(PO4)3(NVP)cathode,the CTHC@VGNVP SIB has a high energy density of 145 Wh kg-1 at a power density of 1380 W kg-1.This work highlights the great potential of graphene for enabling high-performance,cost-effective,and sustainable energy storage.