军事知识服务平台
基于LS-DYNA的盲天井中深孔一次成井掏槽爆破布孔优化研究
Study on Layout Optimization for Cut Blasting for One-step Raise Excavation with Medium-Deep Holes in Blind Raise Based on LS-DYNA
摘要 为探究盲天井中深孔一次成井掏槽爆破布孔方式对爆破效果的影响,以云南某锡矿工程为背景,采用LS-DYNA有限元数值模拟技术,对5种不同布孔方式的槽腔截面损伤面积与掘进进尺展开对比分析,筛选最优布孔方案并进行现场试验验证.结果表明:方案1(九孔桶形掏槽)爆破损伤面积总和达16.03 m2,掘进进尺883 cm,为最优方案,其次是方案5,而方案4最差.方案1的损伤面积和掘进进尺相比方案5分别提升1.84%和1.73%,较方案4分别提升26.9%和4.6%,综合爆破效率优于其他方案.对最佳布孔方案进行现场试验,实际成井高度与设计高度一致,槽腔成型较为规整,大块率较低.本方案可使类似中等稳固大理岩地质条件下的盲天井爆破掘进循环效率提升3%~5%,减少炸药无效消耗15%以上,可为盲天井中深孔爆破一次成井布孔方式的选择提供参考.
Abstract:
To investigate the influence of hole layout schemes for cut blasting in one-time blind raise sinking with medium-deep holes on blasting performance,taking a tin mine project in Yunnan as the engineering background,the finite element numerical simulation technology of LS-DYNA was adopted to compare and analyze the damage area of cut cavity cross-section and excavation advance under five different hole layout patterns.The optimal hole layout scheme was screened out and verified via field tests.The results show that Scheme 1(9-hole cylindrical cut)achieves a total blasting damage area of 16.03 m2 and an excavation advance of 883 cm,making it the optimal scheme,followed by Scheme 5,while Scheme 4 exhibits the worst performance.Compared with Scheme 5,the damage area and excavation advance of Scheme 1 increase by 1.84%and 1.73%,respectively;compared with Scheme 4,they rise by 26.9%and 4.6%.Its comprehensive blasting efficiency surpasses other schemes.Field tests carried out on the optimal layout scheme indicate that the actual raise forming height matches the designed height,the cut cavity presents regular shape without obvious oversize rock blocks.For blind raise blasting excavation under similar geological conditions of medium-stable marble,this scheme can improve the cycle efficiency by 3%~5%and reduce ineffective explosive consumption by more than 15%.It provides a reference for the selection of hole layout patterns for one-time blind raise forming by medium-deep hole blasting.
刊 名 云南冶金
年,卷(期): 2026, 55(4)
分类号: TD235
机标分类号: TD235.33 TD712 TD861.1
在线出版日期: 2026年9月20日