军事知识服务平台
电炉静态焙烧脱除热镀锌灰中高含量氯制备陶瓷釉料级氧化锌
Electric Furnace Static Roasting for Removal of High Chlorine Content from Hot-Dip Galvanizing Ash to Prepare Ceramic Glaze-Grade Zinc Oxide
摘要 针对回转窑动态焙烧热镀锌灰脱氯存在能耗高、锌回收率低、脱氯率低、排放大量CO2等问题,以多家热镀锌企业热镀锌灰综合料为实验原料,采用电炉静态焙烧脱氯.实验结果表明,焙烧温度950 ℃,保温时间120 min最佳工艺条件下,脱氯率达99.53%,氯含量由11.59%降至0.09%,满足陶瓷釉料级氧化锌对氯含量的要求(低于0.3%).能耗经济估算表明,电炉焙烧处理热镀锌灰与工业回转窑相比可节约能耗成本1 562元/t,每脱除1 kg氯可降低能耗约140 MJ.
Abstract:
To address the problems existing in chlorine removal from hot-dip galvanizing ash by dynamic roasting in rotary kilns,such as high energy consumption,low zinc recovery rate,low chlorine removal rate and massive CO2 emission,mixed hot-dip galvanizing ash collected from multiple hot-dip galvanizing enterprises was used as experimental raw material,and static roasting in an electric furnace was adopted for chlorine removal.Experimental results show that under the optimal process conditions of roasting temperature of 950 ℃and holding time of 120 min,the chlorine removal rate reaches 99.53%.The chlorine content decreases from 11.59%to 0.09%,which meets the chlorine content requirement(less than 0.3%)for ceramic glaze-grade zinc oxide.Economic estimation of energy consumption shows that treating 1 ton of hot-dip galvanizing ash by electric furnace roasting can save energy cost of 1 562 RMB compared with industrial rotary kiln,and the energy consumption can be reduced by approximately 140 MJ per kilogram of chlorine removed.
刊 名 云南冶金
年,卷(期): 2026, 55(4)
分类号: TF813 X758
机标分类号: O657.31 TS202.3 TQ454.2
在线出版日期: 2026年9月20日
基金项目: 01912321029:云南省产业技术领军人才计划,