Phosphoric acid cyclic freeze-thaw modified wood flour and its application in polyurethane printing paste
摘要
为改善生物质填料与水性聚氨酯印花涂料基体的界面相容性,采用85%磷酸循环冻融法对杨木木粉进行溶解改性,系统研究了木粉含量和冻融循环次数对木粉化学结构、结晶形态和表面形貌的影响,并将改性木粉作为填料应用于水性聚氨酯印花涂料.结果表明,当木粉质量分数为10%、冻融循环3次时(RWF-10-3),改性木粉/聚氨酯复合涂层的拉伸强度达12.5 MPa,断裂伸长率达384%,较未改性木粉体系分别提高131%和48%;印花织物的耐干摩擦色牢度达到4~5级,耐湿摩擦色牢度达到4级,耐皂洗色牢度达4~5级(褪色)、4级(棉沾色),均显著优于未改性体系.磷酸循环冻融法通过溶解再生机制实现了木粉的晶型调控与表面活化,为生物质填料在聚氨酯印花涂料中的高性能化应用提供了新途径.
To improve the interfacial compatibility between biomass filler and waterborne polyurethane printing coating,poplar wood flour is modified via 85%phosphoric acid cyclic freeze-thaw treatment.The effects of wood flour content and freeze-thaw cycles on its chemical structure,crystalline morphology,and surface mor-phology are studied,and the modified wood flour is applied as filler in waterborne polyurethane coatings.Re-sults show that at 10%wood flour content and three freeze-thaw cycles(RWF-10-3),the tensile strength and elongation at break of the composite coating reach 12.5 MPa and 384%,which are 131%and 48%higher than those of the unmodified system,respectively.The printed fabric exhibits dry rubbing fastness of Grade 4-5,wet rubbing fastness of Grade 4,soaping fading fastness of Grade 4-5,and staining fastness of Grade 4,all sig-nificantly better than the unmodified system.The phosphoric acid cyclic freeze-thaw method enables the regu-lation of crystal form and surface activation of wood powder through a dissolution-regeneration mechanism,of-fering a new route for high performance application of biomass filler in polyurethane printing coatings.