单螺杆压缩机喷液趋向啮合副间隙的流动特征研究
Research on the Lubrication Characteristics of Liquid Injection in the Clearance between the Star Wheel and Screw of Single Screw Compressor
摘要
单螺杆压缩机啮合副星轮齿磨损的问题是行业难题,确保啮合副间隙内足量的润滑液分布是解决星轮齿磨损问题的有效手段.为探明不同喷液孔位置和喷液角度对于喷液趋向啮合副间隙的流动特征的影响,建立了单螺杆压缩机工作腔内喷液的瞬态 VOF 三维数值模拟模型,获得了星轮齿前后侧间隙获得喷液量的对比.样机的磨损试验表明了间隙能够获得的喷液量与星轮齿侧的磨损程度具有相关性.在此基础上,提出采用星轮-螺杆间隙的流量分布特征作为啮合副润滑效果评价指标的方法,探究了喷液孔位于不同齿高位置、处于不同喷液角度时对于喷液润滑效果的影响规律.研究结果表明:当喷液孔位于0.64 的齿高位置,喷液角度为 90°时,齿前侧间隙、齿后侧间隙获得的喷液量及星轮-螺杆间隙获得的总喷液量最大.研究结果对于设计水润滑单螺杆压缩机的啮合副喷液润滑结构具有指导意义.
The problem of the star wheel teeth wear in the meshing pair of a single screw compressor is an industry challenge.Ensuring sufficient distribution of lubricant in the clearance of the meshing pair is an effective means to solve the problem of the star wheel teeth wear.In order to explore the flow characteristics of different spray hole positions and spray angles towards the meshing clearance,this paper established a transient VOF three-dimensional numerical simulation model for the spray in the working chamber of a single screw compressor,and obtained a comparison of the spray amount obtained from the front and rear clearances of the star wheel teeth.The wear test of prototype show a correlation between the amount of liquid sprayed the clearances obtained and the degree of wear on the front and rear sides of the star wheel teeth.On this basis,a method was proposed to use the flow distribution characteristics in the clearance between the star wheel and screw as the evaluation index of the lubrication effect of the meshing pair,and the influence of the spray hole at different tooth height positions and spray angles on the lubrication effect of the spray was explored.The research results indicate that when the spray hole is located at a height of 0.64 times the tooth height and the spray angle is 90°,the total flow rate of the front tooth clearance,rear tooth clearance,and star wheel-screw clearance is the highest.The research results have guiding significance for designing the spray lubrication structure of the meshing pair of a water lubricated single screw compressor.
年,卷(期):
2026, (4)
分类号:
TH452
机标分类号:
TH455
TQ320.5
TH117
在线出版日期:
2026年9月30日