柴油机曲柄连杆机构小头瓦磨损机理研究
Research on Wear Mechanism of Small-end Bushing of Diesel Engine Crankshaft Connecting Rod Mechanism
摘要
为揭示柴油机曲柄连杆机构小端轴承的磨损机理,本研究考虑了强冲击载荷影响,基于混合弹流润滑(MEHD)理论,构建了耦合小头瓦润滑间隙的曲柄连杆刚柔耦合动力学模型.通过小头瓦磨损故障模拟实验,对比故障前后机体振动加速度信号与模型振动响应,验证了模型的准确性.在此基础上,系统研究了不同磨损深度下的润滑演化特征,包括轴承力、峰值油膜压力与粗糙接触压力等关键参数.结果表明:磨损深度对润滑性能有非线性影响,油膜压力最大值先升高在下降,而粗糙接触压力整体随磨损增加.研究揭示了复杂工况下小头瓦润滑特性的动态演化规律,为高负载发动机轴承系统的设计与健康监测提供了理论依据.
To reveal the wear mechanism of the small-end bearing in diesel engine crankshaft connecting rod mechanisms,this paper considered the influence of severe impact loads and established a rigid-flexible coupled dynamic model of the crankshaft connecting rod that incorporated the lubrication gap of the small-end bushing,based on the mixed elastohydrodynamic lubrication(MEHD)theory.Through small-end bushing wear fault simulation experiments,the model accuracy is verified by comparing the engine block vibration acceleration signals before and after the fault with the model's vibration responses.On this basis,the lubrication evolution characteristics under different wear depths are systematically investigated,including key parameters such as bearing force,peak oil film pressure,and rough contact pressure.Results show that wear depth exerts a nonlinear effect on lubrication performance:the maximum oil film pressure first increases and then decreases,while the rough contact pressure generally rises with increased wear.This study uncovers the dynamic evolution law of the small-end bushing's lubrication characteristics under complex operating conditions,providing a theoretical basis for the design and health monitoring of bearing systems in high-load engines.
年,卷(期):
2026, (4)
分类号:
TH45
机标分类号:
TH117.2
V216.22
U463.212
在线出版日期:
2026年9月30日