闪蒸蒸汽螺杆压缩机管道振动抑制技术研究与应用
Research and Application of Pipeline Vibration Suppression Technology for Flash Steam Screw Compressors
摘要
在炼化企业低温热回收利用系统中,螺杆式压缩机出口管道的气流脉动与振动超标问题是制约装置稳定运行的技术难题.以某石化公司二套溶剂再生装置能效提升项目闪蒸蒸汽热泵机组为研究对象,针对螺杆压缩机 K-3101 出口管线振动烈度高达 140 mm/s 的隐患问题,采用现场振动监测与固有频率测试、气流脉动平面波动理论建模分析、振动有限元仿真等综合手段,明确了激振根源为出口管道缺乏消声器导致的840 Hz 气流脉动严重超标(超允许值7.37 倍).据此设计并安装了一款带粒子阻尼效应的两腔室出口消声器,同时优化管道布局并增设防振支架.改造实施后,消声器及附属管道最大振动速度幅值由 140 mm/s 降至 6.5 mm/s,降幅达 95.4%,管道振动评定等级达到 A 级,机组得以长周期稳定运行,年经济效益达880.2 万元.该隐患问题的彻底解决对容积式压缩机出口管道振动在设计阶段、试车阶段的超标治理具有重要的借鉴意义.
In low-temperature heat recovery systems of refining enterprises,excessive airflow pulsation and vibration in the outlet pipelines of screw compressors are technical challenges that limit stable operation.This paper focused on the flash steam heat pump unit of the second solvent regeneration unit energy efficiency improvement project at a petrochemical company.To address the issue of high vibration intensity(up to 140 mm/s)in the K-3101 screw compressor outlet pipeline,a combination of approaches was used,including on-site vibration monitoring and natural frequency testing,theoretical modeling of airflow pulsation plane waves,and vibration finite element simulation.It was determined that the cause of the vibration was serious airflow pulsation at 840 Hz in the outlet pipeline due to the lack of a silencer,exceeding the allowable value by 7.37 times.Based on this,a two-chamber outlet silencer with particle damping effect was designed and installed,with optimized pipeline layout and added anti-vibration supports.After the modifications,the maximum vibration velocity of the silencer and attached pipeline dropped from 140 mm/s to 6.5 mm/s,a reduction of 95.4%,reaching grade A vibration rating.The unit was able to operate stably over long periods,generating an annual economic benefit of 8.802 million yuan.Resolving this issue provides important reference for controlling outlet pipeline vibration of volumetric compressors during design and commissioning phases.
年,卷(期):
2026, (4)
分类号:
TH455
机标分类号:
TP241
TN929.5
V448.22
在线出版日期:
2026年9月30日