Effect of Ce Addition on the Microstructure and Hydrogen Storage Properties of Ti50V25Cr25 Alloy
摘要
Ti-V-Cr基体心立方(BCC)固溶体合金具有较高的理论储氢容量,但其室温活化困难和吸放氢动力学较慢限制了实际应用.为改善 Ti50V25Cr25 合金的活化与吸放氢性能,采用真空非自耗电弧熔炼法制备了Ti50-xV25Cr25Cex(x=0,1,2,3,4)合金,系统研究了 Ce含量对合金相组成、显微组织、吸放氢动力学、PCT平台特征、放氢活化能及循环稳定性的影响.结果表明,未添加Ce的Ti50V25Cr25合金由单一BCC相组成;而添加了Ce的合金,BCC相仍为主相,同时形成CeO2/Ce富集相.Ce添加显著改善了合金的首次吸氢活化行为,其中x=3合金首次吸氢容量最高,达到3.29 wt.%.PCT结果表明,含Ce合金的吸氢平台压力高于基体合金,但随着Ce含量增加整体降低.DSC和Kissinger分析表明,Ce添加使放氢峰温度由588.4 K降低至553.1 K,并使放氢活化能由139.09 kJ·mol-1 降低至111.24 kJ·mol-1,有利于改善放氢动力学.循环结果表明,Ce对合金循环稳定性的提升有限.综上所述,适量Ce添加可有效改善Ti50V25Cr25 合金的首次活化和吸放氢动力学性能,但过量Ce会引入较多非储氢相并降低有效储氢容量.
Research:Ti-V-Cr-based alloys are considered promising solid-state hydrogen storage materials because of their body-centered cubic(BCC)solid-solution structure and high theoretical hydrogen storage capacity.However,their practical application is still limited by difficult room-temperature activation and sluggish hydrogen absorption/desorption kinetics.Rare-earth element addition is an effective strategy to regulate surface activation behavior,phase constitution,and hydrogen storage performance.Among rare-earth elements,Ce is attractive because of its strong oxygen affinity and possible catalytic effect during initial hydrogen absorption.Nevertheless,the effect of Ce content on phase evolution,Ce-rich phase formation,PCT plateau behavior,dehydrogenation activation energy,and cycling stability of Ti50V25Cr25 alloys remains insufficiently understood.This work aims to clarify the relationship among Ce content,microstructure,and hydrogen storage properties in Ti50–xV25Cr25Cex alloys.
Methods:A series of Ti50–xV25Cr25Cex(x=0,1,2,3,and 4)alloys were prepared by vacuum non-consumable arc melting under an argon atmosphere.Phase constitution before and after hydrogen absorption was analyzed by X-ray diffraction(XRD).Microstructural features and elemental distribution were examined using field-emission scanning electron microscopy combined with energy-dispersive spectroscopy(FESEM-EDS).Hydrogen absorption and desorption kinetics were evaluated using a Sieverts-type apparatus.Pressure-composition-temperature(PCT)measurements were conducted at different temperatures to determine plateau characteristics and thermodynamic parameters.Differential scanning calorimetry(DSC)at different heating rates was used to analyze dehydrogenation behavior,and the apparent activation energy was calculated using the Kissinger method.
Results:The Ce-free Ti50V25Cr25 alloy consists of a single BCC phase,whereas Ce-containing alloys retain the BCC matrix and form CeO2/Ce-rich secondary phases.With increasing Ce content,the amount of Ce-containing secondary phase gradually increases.Ce addition markedly improves the first hydrogen absorption activation behavior of Ti50V25Cr25 alloy.Among the studied alloys,the x=3 alloy exhibits the highest first hydrogen absorption capacity of 3.29 wt.%.PCT results show that Ce-containing alloys have higher hydrogen absorption plateau pressures than the base alloy,while the plateau pressure decreases with increasing Ce content among the Ce-containing alloys.DSC and Kissinger analyses indicate that Ce addition reduces the dehydrogenation peak temperature from 588.4 K to 553.1 K and decreases the apparent activation energy from 139.09 kJ·mol-1 to 111.24 kJ·mol-1,indicating improved dehydrogenation kinetics.Cycling tests show that Ce addition has only a limited effect on improving cycling stability.
Conclusions:Ce addition has a dual influence on the hydrogen storage behavior of Ti50V25Cr25 alloy.An appropriate Ce content improves room-temperature activation and hydrogen absorption/desorption kinetics,mainly by promoting surface activation and introducing Ce-containing secondary phases.However,excessive Ce addition increases the fraction of non-hydrogen-storage phases,which reduces the effective hydrogen storage capacity.Overall,the x=2 and x=3 alloys show a better balance among activation behavior,hydrogen storage capacity,dehydrogenation kinetics,and cycling stability.These results provide experimental guidance for optimizing rare-earth-modified Ti-V-Cr-based hydrogen storage alloys.