军事知识服务平台
还原-碱浸工艺回收分银炉烟灰中碲
Recovery of tellurium from silver-separating furnace flue dust by reduction-alkaline leaching
摘要 针对分银炉烟灰中高价态碲难浸出及火法回收碲回收率低等问题,本文采用还原-碱浸工艺处理分银炉烟灰,考察了氢氧化钠浓度、亚硫酸钠加入量、反应温度、反应时间、液固比和搅拌速率对碲浸出率的影响,确定了最佳工艺条件,并通过工业试验验证了该工艺的可行性,得到以下主要结论.使用亚硫酸钠还原和氢氧化钠浸出联合工艺回收分银炉烟灰中碲可行.在氢氧化钠浓度1.2 mol/L、亚硫酸钠加入量为碲含量的0.85倍、反应温度85℃、反应时间1.5 h、液固比5∶1、搅拌速率150 r/min条件下处理分银炉烟灰,平均碲浸出率可达94.5%;采用还原-碱浸工艺处理分银炉烟灰,浸出液中Pb、Sb含量极低,经除砷净化后可满足后续电积工序要求,杂质脱除路径明确;尾渣中碲含量降至0.2%以下,铅和锑含量较高,可继续返回转炉,进行综合回收利用;还原-碱浸工艺处理分银炉烟灰成本较传统火法工艺高,但碲回收率远远大于火法工艺(45%),经济效益显著.本研究提出的"还原-碱浸"工艺对其他含碲难浸物料的处理具有借鉴意义.
Abstract:
To address the low leachability of high-valence tellurium in silver-separating furnace flue dust and the low recovery rate of tellurium by pyrometallurgical processes,this study employed a reduction-alkaline leaching process to treat the flue dust.The effects of sodium hydroxide concentration,sodium sulfite dosage,reaction temperature,reaction time,liquid-to-solid ratio,and stirring speed on tellurium leaching efficiency were investigated,the optimal process conditions were determined,and the feasibility of the process was verified through industrial trials.The following main conclusions were drawn.It is feasible to recover tellurium from silver-refining furnace flue dust through a combined process involving sodium sulfite reduction and sodium hydroxide leaching.Under the optimal conditions of NaOH concentration 1.2 mol/L,Na2SO3 dosage 0.85 times the total mass of tellurium in the dust,reaction temperature 85℃,reaction time 1.5 h,liquid-to-solid ratio 5∶1,and stirring rate 150 r/min,the average tellurium leaching efficiency reached 94.5%.The reduction-alkali leaching process produced leach solutions with extremely low concentrations of Pb and Sb,and after arsenic removal and purification,the solution achieved standards suitable for subsequent electrowinning operations,providing a clear impurity-removal pathway.In the treatment of the filtration of the leaching residue,the tellurium content was reduced to below 0.2%,while the residue still contained relatively high levels of lead and antimony,allowing it to be returned to the converting furnace for comprehensive recovery and utilization.Although the cost of the reduction-alkali leaching process was higher than that of the traditional pyrometallurgical process,the tellurium recovery rate was significantly superior(far exceeding the 45%achievable by the conventional method),producing substantial economic benefits.The proposed reduction-alkali-leaching process also serves as a valuable reference for treating other refractory materials containing tellurium.
刊 名 中国有色冶金 PKU
年,卷(期): 2026, 55(5)
分类号: TF843 TF803
机标分类号: TF831 TD926.4 TS255.44
在线出版日期: 2026年11月6日
基金项目: 2025CXGC010416:山东省重点研发计划(重大科技创新工程)项目,