军事知识服务平台
Mg体相掺杂对超高镍正极材料结构与电化学性能的改性研究
Modification of structure and electrochemical performance of ultrahigh-nickel cathode materials via Mg bulk doping
摘要 针对超高镍层状氧化物正极材料LiNi0.9Co0.05Mn0.05O2(NCM90)循环与热稳定性不足的问题,采用共沉淀与高温固相结合的方法制备了基础材料,并系统研究了Mg元素体相掺杂对其性能的影响.Mg2+的离子半径与Ni2+相近,掺杂时优先占据过渡金属层位点,可凭借较强的Mg—O键合作用抑制Ni2+向锂层迁移,同时其非电化学活性特征有助于降低深度脱锂态下高活性Ni4+的生成比例,从结构稳固与界面稳定双重路径改善材料性能.然而,目前关于Mg掺杂浓度在0~4%(摩尔分数)范围内的精细调控对阳离子混排程度、晶格参数演化及电荷转移阻抗的定量影响尚缺乏系统研究,该浓度区间内掺杂效益的阈值效应与过量掺杂的结构退化机制亦不明确.结构表征表明,适量的Mg掺杂(2%,摩尔分数)可有效抑制Li+/Ni2+阳离子混排,提升层状结构有序度.电化学测试显示,改性后材料的首次库仑效率从87.5%提高至92.7%,1 C倍率循环100次后容量保持率由78.3%显著提升至88.6%,5 C高倍率容量保持率达78.6%.热稳定性测试表明,其起始放热峰温从214.3℃推迟至228.7℃,放热量降低21.4%.上述研究证实,Mg掺杂能同步改善超高镍正极材料的结构稳定性、循环性能与热安全性,为开发高能量密度、长寿命的锂离子电池提供了重要的材料基础.
Abstract:
In order to solve the problems of inadequate cycling and thermal stability in the ultra-high nickel layered oxide cathode material LiNi0.9Co0.05Mn0.05O2(NCM90),coprecipitation and high-temperature solid-phase synthesis were used to prepare the base material.The effects of bulk Mg doping on its performance were then systematically investigated.The effects of bulk doping with magnesium elements on the properties of the material were then carefully examined.The ionic radius of Mg2+is similar to that of Ni2+,enabling it to preferentially occupy transition metal sites during doping.By forming stronger Mg—O bonds,it can suppress the migration of Ni2+into the lithium layer while its non-electrochemical activity helps reduce the formation of highly reactive Ni4+under deep delithiation states,thereby improving material performance through both structural stability and interfacial stability.However,systematic studies on the quantitative effects of fine Mg doping concentrations(0-4 mol%)in controlling cation mixing,lattice parameter evolution,and charge transfer impedance are still lacking.Additionally,the threshold effects of doping efficiency and the structural degradation mechanisms of excessive doping within this concentration range remain unclear.Moderate Mg doping(2 mol%)may effectively prevent the mixing of Li+/Ni2+cations and improve the orderliness of the layered structure,according to structural characterisation.Electrochemical tests showed that the first coulombic efficiency of the modified material increased from 87.5%to 92.7%,and the capacity retention rate significantly increased from 78.3%to 88.6%after 100 cycles at 1 C rate.The capacity retention rate at 5 C high rate reached 78.6%.Thermal stability analysis shows that the initial heat release peak temperature has been delayed from 214.3℃to 228.7℃,and the heat release has decreased by 21.4%.Research has confirmed that Mg doping can simultaneously improve the structural stability,cycling performance,and thermal safety of ultra-high nickel cathode materials,providing an important material foundation for the development of high-energy density and long-life lithium-ion batteries.
刊 名 中国有色冶金 PKU
年,卷(期): 2026, 55(5)
分类号: TM912 TB34
机标分类号: TM912.9 TB303 TM242
在线出版日期: 2026年11月6日
基金项目: JXJG-19-60-4:江西省高等学校教学改革研究项目,